Jump to content
SAU Community

My Turbo sounds like a blender!!!

R31Nismoid

By R31Nismoid,
in Engines & Forced Induction

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

I've got a t04e(i think or something near to that) on the side of my RB25.

Last night the turbo just started to whine really loud like a blender with nothing in it. The whine was reasonably high pitched and started when i reached 5000rpm.

The car hits the 13psi it's set to at 4300rpm so when it hits 5000 it's only just making all it's power... but it doesn't have any power at all now.

My Turbo is usually very quiet and i cant hear it at all when on boost. Only the sucking of air and the exhaust so it was noticable straight away that something is a miss.

Any ideas what could be wrong with either the car that's making the turbo whine, or is it the turbo itself?

We checked all the cooler hoses and the intake pipe (mine is metal) is still on.

I've got and ARC cooler.

Thanks guys!

ash

Link to comment
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

mmm... im thinking it is.

but could something else making it do it ???? (unlikely i know)

BTW anyone know how much a rebuild should cost ?

But then, i can get it 'tinkered' with too while it's off... and get some more out of it, this situation might not be all bad

Link to comment
Share on other sites
TTT Grand Master

TTT

Posted
Posted

one other thing.

My RB20 turbo was making a noise.

It turned out to be the gasket between the turbo and the manifold (on the block)

it seems that one of my bolts had fallen off and the heat at that corner started to burn out the gasket and eventially melt it and air was escaping through there and whining it's head off.

turbo was in perfect condition.

But if yours has a lot of thrust play (as in back and forth in to the turbo, not side to side), then you may have issues..

Although, a little play is normal.

If it is a gasket, it will set you back less than $50 for the gaskets and who knows how much to pull the turbo off and replace the gasket.

Link to comment
Share on other sites
JimX Grand Master

JimX

Posted
Posted

R31Nismoid, if you have to pull the turbo off, you can do it yourself. I've done a how-to in the Maintenance section, do a search. And since I've also got a T04E, you will probably be able to follow it word for word :(

Link to comment
Share on other sites
Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

does it make chocolate milkshakes too??? hope everything turns out okay....everything happens for a reason maybe its time for more power..

Link to comment
Share on other sites
rbs13 Community Regular

rbs13

Posted
Posted

my car done the same thing today.. sh*t my self.. stupid stocko bov caused it.. took it off and blocked up the whole and its all sweet.. check everything else before you go taking it off and getting it rebuilt.. could be a gasket? or a stuffed bov.. :(.. it was a wheezing noise when boost came on?

Link to comment
Share on other sites
Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

rbs13 had the same thing with my stock BOV (R33) when i re greased it, started making these whistle like sounds when revs were held about 2000rpms and probably higher but had a pod etc so couldnt hear it.

Link to comment
Share on other sites
whistla Proficient

whistla

Posted
Posted

Have u made sure its not the obviouse though?

wouldnt want to be up for the cost of a rebuild only to find out it was a leaky gasket

make sure it gets proven to you that it is the bearing when the turbo is all off

i recently replaced my turbo with an aftermarket item...it was suprisingly easy to do :S

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pogman
      George's R33 GTST build

      By pogman · Posted

      Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • GTSBoy
      Hello Everyone

      By GTSBoy · Posted

      They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • Triple OG
      Hello Everyone

      By Triple OG · Posted

      I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...