Jump to content
SAU Community

Help :( R32 Hard Brake Pedal, Can't Find Out What It Causing It.

Ten Four
 Share

Recommended Posts

Ten Four Grand Master

Ten Four

Posted
Posted (edited)

Heres the story:

Bought an unreg R32 GTS4 that had been sitting for a while. And now it wants to go over the pits and has failed twice for a hard brake pedal. So far this has been done:

Brakes bled

Front & Rear calipers reconditioned

New pads fitted

Master cylinder reconditioned

Rotors skimmed

Brake booster pressure tested

Brake fluid changed

The brakes react to first part of pedal travel but go solid when trying to press hard, ie in a emergency stop. This is why pits said they won't pass it.

NOTE: Car has factory ABS fitted.

So far, can't get rid of the hard pedal. Beginning to suspect while booster has passed pressure test, it is miss-performing. Has anybody got one that they can lend me to test? Or if it comes to it, anyone have a good condition one to sell?

Anybody had this problem before? (Rmb ABS fitted)

Edited by Ten Four
nick81xd Community Regular

nick81xd

Posted
Posted

definetly will be a vacuum related issue with booster. check that the one way vavle in the booster hose isnt buggered.. just get another bit of hose in its place temporarly to check. if that doesnt work id say your booster is finished.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 Gtr Long Term Love, Now Project

      By Piggaz 路 Posted

      I don鈥檛 dig. 馃お
    • DRoc81
      Shifting questions

      By DRoc81 路 Posted

      Gotcha, I mean that is at least good to hear. Are there signs, or troubleshooting tips to make sure the transmission is operating properly?
    • DRoc81
      Shifting questions

      By DRoc81 路 Posted

      Well thats probably not gonna happen right away. LOL
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 路 Posted

      I'm hoping I just don't have to do an engine rebuild NOW. Doesn't mean I won't do it at some point. I think a plus point is that the car presumably ran on or close to stock power nearly all it's life so far. Only the Owner I bought it from actually increased power with a standalone ECU and blew the OEM turbos. And after it got thee 2860s it wasn't driven an awful lot either.   That is what I meant. With the twins coming on so late (4500-5000rpm) I hope the rods won't want to exit the block prematurely. And it still being a 26 means the torque curve isn't gonna hike up all that much.   It didn't blow up on the dyno when they tuned it to 500ish crank. So I suppose it'll be okay for now. They did put a Tomei head gasket on first though which did not seal at all, and they redid it with a Cometic one. Which I hope won't be my water leak.   Mainly anything oil. So far all it has is the N1 pump, oil restrictor and a filter relocation kit with a cooler.
    • GTSBoy
      Comfortable replacement seats for R32 GTR

      By GTSBoy 路 Posted

      15000? ish? Something like that anyway. It wasn;t so much a wear as a tear that then spread. Might have lasted a lot longer if not bothered by just one incident, whatever it was. I took a punt. They are really comfortable and do a good job of holding. My daughter HATED it when I first put them in, and probably still does now. She has sensory issues and hates the way they are all up your business. I'm 197cm and 95kg. Not fat or particularly wide, and the XL size seat is the rigth fit. If I was any fatter it would start to get too snug. Any skinnier and you'd possibly want the smaller width.
脳
脳
  • Create New...