Jump to content
SAU Community

Recommended Posts

Hi all

I have one of those stupid XANAVI units in my R34 GTT and given that it has the RCA connections in the boot, hence I though I could avoid spending money on a new head unit for a while.

That said after i have connected the red and white audio cables in the boot, how to I switch to that input?

Thanks in advance

btw has anyone translated the xanavi dash controls?

Link to comment
https://www.sau.com.au/forums/topic/256017-r34-gtt-xanavi-aux/
Share on other sites

Hi all

I have one of those stupid XANAVI units in my R34 GTT and given that it has the RCA connections in the boot, hence I though I could avoid spending money on a new head unit for a while.

That said after i have connected the red and white audio cables in the boot, how to I switch to that input?

Thanks in advance

btw has anyone translated the xanavi dash controls?

________________________________________________________________________________

__________________________________________________

its unclear what you expect to achieve ( e.g. are you trying to install a CD MP3 hu in the boot to feed audio directly into the sender box in the boot and onto the Xanavi hu in the dash and if so why? - you do know that the Xanavi hu audio (as produced by the cd player for instance) is actually sent on via the std cassette radio unit thru to the speakers and not directly to them? have a look at the back of the Xanavi hu and all will be revealed by the mass of connectors!!!!!!!!!)

so, you need to be clearer as to what is your real objective (and hence we will know what is your real question?)

and as for the translation of the function buttons on the Xanavi hu this is on a post on this SAU site - use the search facility - the exercise will be rewarding as it may turn up extra info

pm me if stuck after fully trying the search function

To make things clearer, as you said i'll explain what i am trying to do.

I had plugged a digital tv tuner in to the rca inputs in the boot (video, audio left and audio right). I was doing this so I could tune in to the local tv brodcast and watch it thought the factory pop up screen. I then supplied power to the tuner and set it to output the signal as NTSC.

My question was...

After I had done this I was wondering how I could then set the xanavi to display the output of this dtv tuner?

But since then I have figured out how to and not only that I also found out how to play an mp3 player through the xanavi using the inputs in the Dash

To make things clearer, as you said i'll explain what i am trying to do.

I had plugged a digital tv tuner in to the rca inputs in the boot (video, audio left and audio right). I was doing this so I could tune in to the local tv brodcast and watch it thought the factory pop up screen. I then supplied power to the tuner and set it to output the signal as NTSC.

My question was...

After I had done this I was wondering how I could then set the xanavi to display the output of this dtv tuner?

But since then I have figured out how to and not only that I also found out how to play an mp3 player through the xanavi using the inputs in the Dash

________________________________________________________________________________

___________________

SELF-HELP IS WONDERFUL AIN'T IT

To make things clearer, as you said i'll explain what i am trying to do.

I had plugged a digital tv tuner in to the rca inputs in the boot (video, audio left and audio right). I was doing this so I could tune in to the local tv brodcast and watch it thought the factory pop up screen. I then supplied power to the tuner and set it to output the signal as NTSC.

My question was...

After I had done this I was wondering how I could then set the xanavi to display the output of this dtv tuner?

But since then I have figured out how to and not only that I also found out how to play an mp3 player through the xanavi using the inputs in the Dash

can you share your finds here ? a lot of people ask this question on how to reuse the standard screens ? and also the any wiring found in the sat nav plugs ?

cheers

usually with a dead navi the only way to do it iw via RGB->composite boxes. few will spend the money to do it.

I THINK YOU HAVE LEFT EVERYONE WITH THE QUESTIONS OF WHAT IS INVOLVED - BRIEF OUTLINE WOULD BE HELPFUL - AND COST?

be nice and I'll explain (IE do not yell.)

box is $500 or so and it will adapt/split a video signal into its raw colors and sync signals. as for doing it - not explaining that one. its NOT a DIY thing.

be nice and I'll explain (IE do not yell.)

box is $500 or so and it will adapt/split a video signal into its raw colors and sync signals. as for doing it - not explaining that one. its NOT a DIY thing.

___________________------____________________

fully understand the commercial in confidence and protection of intellectual property thingy - so (does this really have to be as hard as pulling teeth out ?) the next question is can you supply a d.i.y kit so a R34 owner wherever they are in Aust or the world can pull out the Xanavi hu and discard it and install/just plug in your kit (maybe together with some specific new h.u. or incar pc recommended or sold by you) into the existing car wiring loom (and using the in situ connectors for the screen) - you do not have to reveal the techie details - and get some functionality back (i.e. at least the capacity to play dvd/audio, and maybe tv and or sat nav a higher cost option)?

yes/no? - or what can you do?

est total cost/time to deliver ?

no. there are specific connectors in there that I cannot source.

if you are inclined to do so - try. the people that make them (yazaki or AMP.) will sell them to you in 10k lots.

if you are the person from gatton - yes I can do your car - yes it will cost 2-3K to do properly and no it cannot be put to english.

no. there are specific connectors in there that I cannot source.

if you are inclined to do so - try. the people that make them (yazaki or AMP.) will sell them to you in 10k lots.

if you are the person from gatton - yes I can do your car - yes it will cost 2-3K to do properly and no it cannot be put to english.

_____-_______________-________________

Who's the anonymous interloper from Gatton and what has he/she to do with this thread? (Rhetoric question - actually needs no reply)

These multi convo posts never work out.....................................

You could always wack on of those portable dvd players(with RCA and NTSC Output) in the boot, If you just want to watch DVD's? But it would be inconvenient to control the DVD Player since it would be in the boot.

You could get a in car pc with a M2-ATX-HV 140W 6-32V Wide Input Intelligent Automotive DC-DC Power Supply or similar (so the computer starts and shuts down with the car).

Then some how convert VGA to RCA Video (NTSC) this maybe?

http://cgi.ebay.com.au/VGA-to-TV-Converter...tem370157902984

Then get a wireless keyboard/mouse a run the receiver to the cabin.

If you want GPS get a USB receiver and put it on the parcel shelf.

If you want TV get one of those USB DTV tuners, u'd need a decent aerial

And obviously if you want to play DVD's u'd need a DVD RW+- drive in the PC

That's my lame notion, not being full on techie, was gonna look into it but never got round to it

that would work :D

though if you were going to that extent I would drop the video converter and do it with raw video. the IDEAL thing with that would be to reuse the one in the OE DVD unit :)

in all thats quite a good solution for it.

this is another:

http://www.hitv.com.au/products/view.jsp?id=1&category=7

that is basically a windows box running CE. hack that and chuck on what ever apps you like. it WILL do touch screen as well. standard it does GPS,movies and speed info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...