Jump to content
SAU Community

Recommended Posts

i have my s15 injectors up for grabs.

They are side feed and bolt straight into rb25det fuel inj rail. They will make up to 300rwkw give or take (with supporting mods).

i bought them the mid december and planned to use them in my r32 rb25det, however i picked up a set of nismo 555cc's the other day which will give me more head room as injectors go.

cost - $500 firm inc postage if needed

located - adelaide (north east)

contact - via here or pm, call or sms ben (me) @ 0438554500

Link to comment
https://www.sau.com.au/forums/topic/256058-6-x-s15-injectors/
Share on other sites

can you post a pic up?

am interested? these are 480cc?

yer as far as i kno they are, apparently its debatable of what cc they actually are. pic up shortly

are these brand new? would they fit an r34 gtt (NEO) engine without any mods ?
think neos are top feed. these are side feed

no these are not new, not sure about the rb25neo, as ive never had one :)

these are to suit sr20 and rb25det s1 and 2

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...