Jump to content
SAU Community

Driving/TakeOff Tips & Techniques


Recommended Posts

Originally posted by Silver-Arrowz

In a RWD car, I like to rev to 4000 rpm and let the clutch out to it's friction point. Let the wheel get a bit of speed and traction then let the clutch out fully. It's kills the clutch but it's effective.  

Double de-clutching is for downchanging. Try down shifting from high RPM and your rear wheels will lock up for a split second. Things get very hairy if you are going though a turn!!!:eek:

That's exactly what I was going to say on both accounts. I don't know how long my clutch has been in my car (I'm guessing a fair while) but after a number of launches it's starting to slip in 4th.

For a good launch, unless you've got monster slicks on, or a shiteload of HP, you're going to have to use the clutch. And like Arrowz said, letting it come out until you feel it's gripping and you're moving fast, let it right out and your car will just take off.

  • 3 years later...

Street racing is for bums fella..also unless you've put some $$$$ into you're liner be prepared to be ripped and ripped often, stockish liners are a very nice well balanced car and are awesome fun to drive, but are far from what I'd consider quick under any circumstance. Shit my parts runner 62 falcon ute with a warm 289 and stock C4 will destroy any stock and many a semi serious liner @ the "traffic lights gp"

Although i don't know the specs of your ride I'm assuming it's not a big dollar/horsepower beast be prepared to lose to a lot of cars you think you should be able to beat until you put a bucket load of cash into performance upgrades like I eventually did.

Don't get me wrong you'll rip n/a ricers ect np's but don't be disappointed when some bogan in his cheap ass'd old big cube rust bucket hands you your ass on a plate.

Did I mention street racing is dangerous?

/edit ...

old thread...got me good, a55monkee!!!

Edited by madbung

yea i just rev it 3-3.5 ish, slowly work the clutch out and then drop it like its hot once theres enough traction...

i have no need to kill my car and tyres on the street... its really not worth the idiots that want to race me.... watch out for those magnas, ive nearly been ripped by one before....

also draggin in auto is stupid, unless its a 'real drag car' other than that its just stoopid

  • 1 month later...

Yeh i thought when you take off wheelspin is bad.. but honestly you need a bit of wheelspin.. it drasticaly helps.. you8 want your wheels spinning at a certain rev as to when you get traction youri n your lower part of your rev range (as in probably where it just starts to hit boost)

hope that made sense..

  • 3 years later...

Bro, I'm very fresh in twin plate clutch, forgive me for the question again. I wish to learn some tips of smooth start by using twin plate clutch, hopefully some of the senior here can light me up. For me, dual plate clutch is just like on/off switch, is difficult to get the "friction point", how much rev is recommended for a smooth start? I'll be very appreciate for your help.

I love how this thread just keeps getting dug up!

Me too!

I'm trying so hard to find Bill Cosby's skit on how he got his licence on "Fat Albert's Car" with the Cessna engine and Bill says, "Now EEEEEasy on the clutch" =Classic

Linky?

Try down shifting from high RPM and your rear wheels will lock up for a split second. Things get very hairy if you are going though a turn!!!:eek:

Isn't that the point of toe-heel? To avoid that?

...and it not braking just rev-match by gassing it a little.

Bro, I'm very fresh in twin plate clutch, forgive me for the question again. I wish to learn some tips of smooth start by using twin plate clutch, hopefully some of the senior here can light me up. For me, dual plate clutch is just like on/off switch, is difficult to get the "friction point", how much rev is recommended for a smooth start? I'll be very appreciate for your help.

Seeing as you have gone to the trouble of digging this up....

The way you launch with a twin plate will depend on the car. With mine, to achieve a little bit of mechanical sympathy, I rolled into the beams nice and early, held the handbrake, eased the pedel up until revs started to drop (just idling, get in early so plently of time) then I put the clutch back in a bit so it is not dragging, Peg the limiter, when the lights go slip the clutch real quick.

Doing this the car will sit down, then spin the rears, then go full 4wd and take off like a scalded cat. It doesn't bang the way a clutch dump does, but I was still running 1.6 60ft with crappy road tyres and FULL trim, in the photos it looks like it just about lifts front wheels.

Pfft...whilst a somewhat ancient thread, if he had posted a whole new one you would all be whinging about how he hadn't used the search function!

Can't win ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...