Jump to content
SAU Community

Recommended Posts

has any one used there service b4 either buying or importing im looking for a v35 they said they can give me direct auction access has any 1 ever used ther service or purchased a car dirrectly from them they have a nice black 35 for a good price just looking for some feed back b4 i commit

thanks

Link to comment
https://www.sau.com.au/forums/topic/256474-has-any-body-used-japlink-motors/
Share on other sites

i bought my r33 from them a few years back now, very good to deal with and sam realy knows his stuff

got it at a very good price, although it did help quite alot that my dad does him well

I bought a low kms '98 R33 (33,000km) from them and have been very happy with the car. State roads inspection was very thorough, said the k's were genuine and I could tell from looking at the car that it was immaculate. Had some cosmetic repair and a couple of panels resprayed but you'd never know from looking at the car except at the rear numberplate you can see they didn't blend it in as well (but I only noticed after the inspection).

Unfortunately I've had some minor rust bubbling under the paint on the rear wheel arch where it was resprayed, but that only came up more than a year after ownership. But besides that the car has been faultless, and the bubbling issue isn't important enough for me to fix at the moment. I am being pretty anal about all of the above, really. No car's going to be perfect.

Would not hesitate buying another car from them, I've loved it since the day I drove it out of the yard.

Hey guys thanks for the advice i went with jap link and purchased a 3rd month 04 black premium for 28,000 very happy with the car and they gave me a great deal on getting the sat nav and dvd player working to aus specs on site my mech has since been over the car and found no issues other than a lazypower window (care factor zero) i would highly recomend their services and the new owners todd and adam r great to deal with . it always feels good wehn u walk in to a workshop and they have 3 34 gtrs on ther hoist plus some rx7 and evos has any one used them for service they must be well trusted if they work on those type of cars

thanks again and would highly recomend them

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...