Jump to content
SAU Community

R33 Parts - Urgent! Must Sell

Lukas 33
 Share

Recommended Posts

Lukas 33 Proficient

Lukas 33

Posted
Posted (edited)

Hey guys I'm currently running out of room in the shed for all my shit. Everything is from my R33 series 1 manual RB25det. I really need this stuff gone.

Stock turbo - done approx 100 000kms. No shaft play, great condition - $300

Stock BOV - $30

SSQV BOV - $150

Stock Air box - $50

Apexi Power intake POD with bracket - $50

Stock exhaust manifold - $50

Stainless steel hi-mount exhaust manifold with 38mm external wastegate flange - $150

Comeitc MLS Head Gasket - $150

Alternator - $150

Starter motor - $100

Coil pack cover - $50

Stock coil packs - $80

Stock silicone intake pipe - $20

Stock Fuel pump - $40

Plenum runners - $40

Stock CAS - $100

Stock rb25 head - Perfect for rb25/30 - $400

*If the head does not sell on its own the individual prices are as follows*

Stock cam gears - $50

Stock Camshafts - $50

Cam covers - $80

Bare head (minus camshafts, cam gears and covers) - $250

Stock ECU / Comp - $100

Top Secret ECU / Comp - Competizone Rom - $300

Stock cam gear cover - $20

Stock head bolts - $20

Stock clutch and flywheel - $200 or $300 with freshly machined flywheel

Stock flywheel - $50 or $150 freshly machined

Exedy Ceremetallic SC 3 puk clutch with upgraded friction plate - Brand new in box. Can hold up to 345rwkw - $500

Crank Pulley - $20

Stock block - $200

Stock Pistons - $100

Stock Rods - $100

OR Pistons and rods for $120

Sump - $50

Crankshaft - $100

OR Block, pistons and rods, crank and sump for $400

Like I said I NEED this stuff gone asap! If you think my prices are unreasonable make me an offer ;) You can SMS me on 0406895948 or PM me. PM would probably be the best way. I really need this gone so offer away :)

Edited by Lukas 33
Link to comment
https://www.sau.com.au/forums/topic/256518-r33-parts-urgent-must-sell/
Share on other sites
  • 2 weeks later...
Lukas 33 Proficient

Lukas 33

Posted
  • Author
Posted

URGENT!

Everyone who PMed me regarding parts can you mesage me again as my inbox is now empty and I accidently deleted your messages. These were people chasing. Stock BOV, Stock Coil Packs, Stock Turbo, Stock Fuel pump, Stock Ex Manifold, Apexi Pod and Clutch! :D Cheers

  • 1 month later...
Benzino33 Experienced

Benzino33

Posted
Posted
Hey guys I'm currently running out of room in the shed for all my shit. Everything is from my R33 series 1 manual RB25det. I really need this stuff gone.

Stock turbo - done approx 100 000kms. No shaft play, great condition - $300

Stock BOV - $30

SSQV BOV - $150

Stock Air box - $50

Apexi Power intake POD with bracket - $50

Stock exhaust manifold - $50

Stainless steel hi-mount exhaust manifold with 38mm external wastegate flange - $150

Comeitc MLS Head Gasket - $150

Alternator - $150

Starter motor - $100

Coil pack cover - $50

Stock coil packs - $80

Stock silicone intake pipe - $20

Stock Fuel pump - $40

Plenum runners - $40

Stock CAS - $100

Stock rb25 head - Perfect for rb25/30 - $400

*If the head does not sell on its own the individual prices are as follows*

Stock cam gears - $50

Stock Camshafts - $50

Cam covers - $80

Bare head (minus camshafts, cam gears and covers) - $250

Stock ECU / Comp - $100

Top Secret ECU / Comp - Competizone Rom - $300

Stock cam gear cover - $20

Stock head bolts - $20

Stock clutch and flywheel - $200 or $300 with freshly machined flywheel

Stock flywheel - $50 or $150 freshly machined

Exedy Ceremetallic SC 3 puk clutch with upgraded friction plate - Brand new in box. Can hold up to 345rwkw - $500

Crank Pulley - $20

Stock block - $200

Stock Pistons - $100

Stock Rods - $100

OR Pistons and rods for $120

Sump - $50

Crankshaft - $100

OR Block, pistons and rods, crank and sump for $400

Like I said I NEED this stuff gone asap! If you think my prices are unreasonable make me an offer :D You can SMS me on 0406895948 or PM me. PM would probably be the best way. I really need this gone so offer away :P

Is that ecu the same one I wanna buy off you?

Lukas 33 Proficient

Lukas 33

Posted
  • Author
Posted
Is that ecu the same one I wanna buy off you?

Yes it is. The best I can do is $320. I cant go any lower as I am losing too much money.

NOTE: The majority of these items are either SOLD or no longer for sale. At the time of the post I was in need of money fast and would sell anything I had at some pretty low prices. This however is no longer the case

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20DET lean on cold start

      By GTSBoy · Posted

      You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • A31Skyline
      Rb20e and RB20DET parts

      By A31Skyline · Posted

      yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
    • GTSBoy
      Rb20e and RB20DET parts

      By GTSBoy · Posted

      Well, you wouldn't use 2nd hand bearings out of another engine anyway....so just buying the proper bearings is obviously what you're going to do. The crankshaft would be common. The conrods might be common. There is essentially nothing else you would be able to use.
×
×
  • Create New...