Cam Cover Baffles

[djr81]

I am looking at the Mines & Reimax cam cover baffles for the RB26's. The thing I can quite get my head around is physically how large are they? Does anyone have some approx dimension - particularly for the Mines ones. The Reimax equivalents appear to be much shorter.

Both are shown on the Greenline site if anyone is wondering where to look.

[Swiper the Fox]

I am looking at the Mines & Reimax cam cover baffles for the RB26's. The thing I can quite get my head around is physically how large are they? Does anyone have some approx dimension - particularly for the Mines ones. The Reimax equivalents appear to be much shorter.

Both are shown on the Greenline site if anyone is wondering where to look.

ive fitted 5 sets of these...the most recent on Sunday. The Mines ones are longer and need to be drilled to clear the cam cap studs if you keep the baffle caps on.

[GTR37]

here's a pic from the install guide to show the difference. The top photo is the originals.

[R.3.2.G.T.R]

are these suitable for street or mainly track-oriented gear?

[R31Nismoid]

^^ well a lot of track guys here are using the stock ones still.

So you could maybe say track only, as a nice to have part, but not required.

[DCIEVE]

These are the mines baffles I have in some spare covers ready to go in.

Thanks for the tip re the cam cap studs dirt - will make sure I check that out before bolting the covers down.

[cokey]

ive fitted 5 sets of these...the most recent on Sunday. The Mines ones are longer and need to be drilled to clear the cam cap studs if you keep the baffle caps on.

I never drilled mine !

Did you move the baffle caps to the new position as shown in the instructions ?

cheers cokey

[shanef]

I never drilled mine !

Did you move the baffle caps to the new position as shown in the instructions ?

cheers cokey

do you have camp cap studs? or just the std bolts?

i think paul was referring to the aftermarket studs having to be clearanced

[cokey]

do you have camp cap studs? or just the std bolts?

i think paul was referring to the aftermarket studs having to be clearanced

Just the std setup which are bolts for all but the 8 which hold the baffle caps they are studs.

Maybe Paul could post a pic of the drilling ?

When he has a minute,as he is busy preparing for new arrival.

Best wishes to stace.

cokey

[Swiper the Fox]

Just the std setup which are bolts for all but the 8 which hold the baffle caps they are studs.

Maybe Paul could post a pic of the drilling ?

When he has a minute,as he is busy preparing for new arrival.

Best wishes to stace.

cokey

yeah the ones ive installed all used cam cap studs...not bolts...so needed drilling.

new arrival?

Edited February 12, 2009 by DiRTgarage

[cokey]

yeah the ones ive installed all used cam cap studs...not bolts...so needed drilling.

new arrival?

Thought you were about to become a dad ?

cheers cokey

Edited February 12, 2009 by cokey

[ISL33P]

a bit off topic, but are the tomei cam cap studs for the baffle caps longer than all the others ?

[heslo]

Anyone able to give a quick run-down of how to install these puppies? I picked up a set this week but came with no instructions (I know there are ones posted above, however I don't read Japanese) Is it a simple straight swap affair or do some modifications need to be performed?

[Moodles2]

I'm wondering, would it be overkill to use both the Mines triple flow baffle plates, and a oil/air seperator at the same time?

I'm also wondering with the Mine's plates, oil purists here (not one myself, but hypothetically anyway); wouldn't you want the blowby oil that would normally come out the stock baffle plate to be caught by your oil catch can than a oil/air seperator or the triple flow baffle plates sending it back into the sump?

[Moodles2]

Anyone able to give a quick run-down of how to install these puppies? I picked up a set this week but came with no instructions (I know there are ones posted above, however I don't read Japanese) Is it a simple straight swap affair or do some modifications need to be performed?

Check attachment if still needed the instructions

Installation_Instructions_for_Triple_Flow_Cam_Cover_Baffle_Plate.pdf

[heslo]

Sweet, cheers for that buddy, when it mentions liquid gasket, just some normal gasket goo?

[exXU1]

Take em out , blank the breathers off and use a GZ vacuum pump , helps seal the rings better - reduces blow by -reduced and relieves crank case pressure - allows oil to drain out of the head quicker at higher rpm and increases hp - up to 50hp in some cases.Also helps keep oil cleaner if running a little rich in some areas. Good bank for buck.

[shanef]

Take em out , blank the breathers off and use a GZ vacuum pump , helps seal the rings better - reduces blow by -reduced and relieves crank case pressure - allows oil to drain out of the head quicker at higher rpm and increases hp - up to 50hp in some cases.Also helps keep oil cleaner if running a little rich in some areas. Good bank for buck.

do you plumb the pump into the back welsh plug where you typically plumb the head drain into?

what kind of vacuum figure would you aim for in the crankcase?

[Moodles2]

Anyone have experience with the Reimax cam cover baffle? it seens 3/4 the price of the Mines' product