Jump to content
SAU Community

Recommended Posts

Cyl. Head

Ported and Polished

RB25DET Cyl. Head

COMETIC 1.5mm MLS H/G

TOMEI Procams 260 Degree 10.25mm Intake Camshaft

TOMEI Procams 260 Degree 10.25mm Exhaust Camshaft

TOMEI Procams 10.25 Lift Type B Valve Springs

TOMEI Forged Solid Lifters Conversion

TOMEI Cam Pulley IN/EX

TOMEI Adjust Shims

Block

[/b]Bored and Coated RB25DET Block

WISECO 87mm Forged Pistons

RB26DETT Conrods

RB26DETT Crankshaft

ACL Coated Main & Rod Bearings

I will include the following parts together with the motor

APEXI Power FC

GREDDY Timing Belt (Change 6,000km ago),

NGK Iridium plugs

SARD 550cc injectors

Intake Manifold

Ex Manifold

Injector looms

Fuel Rail

Im just looking at $7,000.00 for the whole motor and parts. Engine runs strong. Previously this motor had bearings problem due to stuck oil cooler which i took pretty long to locate the fault. Bearings have been changed recently. Engine was dynoed 388whp@6000rpm with 1.4bar on a GT35R turbo. It will easily hit 420whp-450hp which i have not dynoed. Dyno was done on a DynoDynamics dyno.

Reason im selling because im too tired maintaining my car and decided to sell it. It took me too much time, patience and money building this engine and will put a stop to it. Hope to buy a house soon. Will be putting in a stock motor inside that i have kept for spare.

Edited by Tomei_Powered
Link to comment
https://www.sau.com.au/forums/topic/256838-rb25det-long-block/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 馃ぃ, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
  • Create New...