Jump to content
SAU Community

Recommended Posts

hey all

few questions

well i got my fully built 25/30 back a few days back.. trying to get the engine and bow together before could but the whole lot into my cefiro and it just would not go, found out the internal diameter of the spigot bush was to small for the gearbox output shaft. so i removed the spigot bush all together.

but im wondering if it is complete a must to run a spigot bush???

like if i can ust not use one at alll and it should still be alright?

other question is iv dummy fitted my motor on its own and it fouls on the clutch master because of the forward facing plenum..

wondering how people have gone about relocating clutch master?

or at least how you get around this??

its a a31 cefiro with a built rb30det and rb 25t gear box.

be running around 360rwkw once run in and tuned..

cheeers in advance guys

tom

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/
Share on other sites

already gone through 2 brand new spigot bushs..

they slide over the input shaft.

but once i tap it into the back of the crank its like they shrink so much that it cant slide in again...

doing my head in..

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4425488
Share on other sites

using the soft wooden end of a broom stick to tap the spigot bushs in..

im using standard engine mounts but got a conversion cross member for rb25 box in cefiro off a mate along with the tail shaft needed for it to alll work.

with the gearbox siting on the ground i can slide the spigot bush over the out put shaft fair easyilly and smoothlly.

the fit in the back of the crank is tight as. and yeah once the bush is in its like it squiish's the bush size down so much that it cant let the out put shaft slide threw..

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4426474
Share on other sites

i dont have access to a dummy input shaft at the moment. my old man lined the clutch plates up with a half inch driver handle.e we have tried adusting the cltcuh plates.. but thats when we figured out it was hitting the spigot bush instead of sliding into it

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4426523
Share on other sites

where abouts did you get a dummy input shaft.

just wreckers or somthing??

we know it was deffinatly the spigot bush as it was being pushed back into the crank further.

If you know someone with a blown RB20 gearbox go take the input shaft out of that, pretty sure SR, CA, VG, FJ and L series can be used as well. Exedy sell them but when i installed my exedy hyper twin i used the one they supplied but it was a bit dodgy, it didn't align the clutch propley and i had to use an input shaft out of a blown gearbox i had.

How far in are you hitting the spigot? Does it look like the one below?

post-1332-1140930868.jpg

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4427418
Share on other sites

yeah i was tapping my spigot bush in exact same distance into the crank...

hmm its hard where i am because im one of the few people in this town that drive an import.. so i have to travel about an hour and half each way to get to jap import spares in adelaide..

i have thought about getting another brand new spigot bush and cutting a thin slice straight threw on side. dodgy i know... i just wanna get this motor and box together

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4428399
Share on other sites

I'll address the clutch master cylinder problem.

I picked myself up a new R33 GTSt clutch master cylinder for when the forward facing plenum and GT35R go on. The 33 item is about an inch shorter, my mate also used one on his 32GTS4 with RB30 and Greddy plenum.

Link to comment
https://www.sau.com.au/forums/topic/256975-rb30det-woes/#findComment-4430248
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...