Jump to content
SAU Community

Recommended Posts

Item 1

NISMO (WHITE) GTR Instrument Set for Skyline R33 GTR or GTS-t.

Set includes NISMO 320 KPH Speedo, 11,000 RPM Tacho & 1.4 Bar Centre Entre Boost Gauge.

This one works with odometer motor and other components all having been serviced.

Asking $850 (replacement cost over $2400).

Item 2

Blitz (WHITE) face temperature gauges (in new condition) in a genuine Nismo R33 GTS-t dash enclosure.

The kit includes the following items:

(1) Blitz Engine Temperature Gauge and sender (new cost $450);

(2) Blitz Oil Temperature Gauge and sender (new cost $400);

(3) Blitz Water Temperature Gauge and sender (new cost $400);

(4) Nismo Dash enclosure (new cost $250);

(5) Matching dash matching vinyl heat wrap of enclosure $200.

Total replacement cost of setup = $1650.00

Asking $600

Item 3

Three Nissan Skyline car floor mats sets. They are in better condition then what they look like in the photos.

Good Set - $150

Average Set - $100

Cheap Set - $50

Location – Brisbane (South-side)

Item Condition

The following items have been on my car for approx 2 years and have done less than 2000km in total. All items are in perfect 'as new' condition. Car was a show car and never raced or flogged.

Reason for Selling

Parts are surplus as the ‘show car’ they were on has been de-modified.

Price & Payment Condition – AS LISTED AGAINST EACH ITEM

Extra Info

All serious offers will be considered, if I do not reply to you it is because I do not consider your offer serious or reasonable. Only make an offer if you are intending to buy the turbo set up. Also, I will not reply to you unless you include your full name, telephone number and your address. Please don’t waste your time or mine.

If you can get a better price then this buying it from your dog’s third cousin’s friend on your great uncles side…then do it and please do not waste my time!

Contact Details

(1) You can reply to this post;

(2) You can send me a Personal Message; or

(3) You can call me on 0414 575 676.

Pictures – As Attached

Item 1

NISMO (WHITE) GTR Instrument Set for Skyline R33 GTR or GTS-t.

Set includes NISMO 320 KPH Speedo, 11,000 RPM Tacho & 1.4 Bar Centre Entre Boost Gauge.

This one works with odometer motor and other components all having been serviced.

Asking $850 (replacement cost over $2400).

Item 2

3 x Blitz (WHITE) face temperature gauges (in new condition).

(1) Blitz Engine Temperature Gauge and sender (new cost $450);

(2) Blitz Oil Temperature Gauge and sender (new cost $400);

(3) Blitz Water Temperature Gauge and sender (new cost $400);

Asking $450 for all three.

(4) Nismo Dash enclosure in matching dash vinyl heat wraped - ON HOLD PENDING PAYMENT.

Item 3

Three Nissan Skyline car floor mats sets. They are in better condition then what they look like in the photos. Photos show more shadow then marks.

Genuine Nissan - Good Set including all 5 parts - $150

Genuine Nissan - Average Set including all 5 parts - $100

Genuine Nissan - Cheap Set only has 4 peices - $50

All Items Located – Brisbane (South-side)

  • 2 weeks later...

Item 1

NISMO (WHITE) GTR Instrument Set for Skyline R33 GTR or GTS-t.

Set includes NISMO 320 KPH Speedo, 11,000 RPM Tacho & 1.4 Bar Centre Entre Boost Gauge. - SOLD.

Item 2

3 x Blitz (WHITE) face temperature gauges (in new condition).

(1) Blitz Engine Temperature Gauge and sender (new cost $450);

(2) Blitz Oil Temperature Gauge and sender (new cost $400);

(3) Blitz Water Temperature Gauge and sender (new cost $400);

Asking $450 for all three.

(4) Nismo Dash enclosure in matching dash vinyl heat wraped - SOLD.

Item 3

Three Nissan Skyline car floor mats sets. They are in better condition then what they look like in the photos. Photos show more shadow then marks.

Genuine Nissan - Good Set including all 5 parts - $150

Genuine Nissan - Average Set including all 5 parts - $100

Genuine Nissan - Cheap Set only has 4 peices - $50

All Items Located – Brisbane (South-side)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
    • I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...