Jump to content
SAU Community

Recommended Posts

Hi everyone,

This may sound a bit silly but here goes.

My Rb25 Turbo (R33) is at Hypergear getting the highflow (ATR28G3 450hp) work done and Im getting a 14psi actuator installed as well, As I have not yet got a Z32 AFM or injectors and I was wondering what a safe level of boost would be until I can get these extra bits.

I am still going to drop it down to CRD for a tune once the Turbo is back and I have most of the supporting mods but Im unsure wether I should leave the boost set at 15psi or lower it until AFM and Injectors can be put on.

I know i should have probably got the AFM & Injectors first but the stuffed Turbo was unexpected (And Untimely!)

Im curently running 217rwkw@15psi with standard Turbo

Mods are as follows:

Hybrid FMIC/ Apexi Super suction kit/Custom Air intake and box/Split Dump pipe/HKS 3.5" Cat back/Catco Metal cat (1016cfm I think)/Greddy EMU/Profec Spec B EBC/And as of next week High flow turbo

Any views?

Ta

Standard gtst AFM have a air resolution to 220 rwkw, so if you are making 220 rwkw on 10psi with the highflow then 10psi is all you should run.

As for your injectors 220 rwkw is also safe for them, anymore and your just asking for trouble. Think of it this way, its cheaper to upgrade your injectors before running higher boost than replacing your motor because it wasnt getting enough fuel.

should be right on your after market ecu. ( get tune once u upgrade rest of ya stuff )

i blew my motor up (4 cracked pistons) on my slide hi flow on stock ecu on 16psi after a few months..

Edited by l0WRB

Hey therre i just got my highflow as well same as you! im running it on now with stock AFM stock injectors @ 1bar. It runs pretty good! but there are some flatspots . I will get a tune soon with my PFC.

im running a safe 307 rwhp (229kw) on 11 psi on my highflow until i get injectors and ecu. using a safc2. knock only going to 17-20 on a hot day but sitting on 0 when driving. my dyno

post-24566-1234664695_thumb.jpg

Hey Pal are you still running stock AFM or Z32?

Also what size injectors do all you peeps recommend, 555's or 740's ?

I should be able to get the Z32 in a week or two but the injectors may take a little while

just save up and do both at the same time, another option is s15 injectors i was running them and they are good for around 280 rwkw no worries i just sold my set for $450 as well so they are a good value upgrade. z32 can be had for around 150 -200 so in all for around 600 + 200 for re tune you should be sweet just keep an eye on the for sale section. i think there is another set going for around the same price.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Aren't these run off of high voltage in OEM applications? Like 200+V. Or at least 48V in mild hybrids. At ~18,000 BTU ballpark nominal capacity the power draw is at what, 2.2 kW? ~185A is a pretty crazy amount of amps. At 200V it's only 11A. The 70A nominal kits with up to 100A peak draw I see for stuff like classic Porsches have pretty substantial compromises like shutting off at idle and not actually managing to keep the interior cool in hot conditions because they can only output like 6000 BTU. IMO if I had to pick what high amp draw component to retrofit to these cars I would start with the engine fan, not the AC compressor. You need an ~850-1000W brushless fan, something like this: I would love to see the data but I would bet that whatever you save by running the AC compressor in a more efficient regime with an electric motor you're probably losing to conversion losses anyways. It's not really like a clutch fan where you're losing power all the time even when it's nominally disengaged and it gets worse as it engages because the envelope tracking isn't that precise.
    • I am a volunteer marshal at the Grand Prix. As such, I get a "friend / family" ticket. It is a general admission ticket, valid for all 4 days. Anyone interested in my spare pass, please DM me. Ticket is "free, gratis and no expense".
    • agreed, the price vs gains it’s there.   unless you go china supercharger. Temu racing anyone?😂https://www.facebook.com/share/15nkfpsg7Z/?mibextid=wwXIfr that was one of the ones that popped up on my feed 😂
    • Bit of a long shot but if anyone has 4 of these laying around in new or near new condition. I will happily buy them off you.     https://skylinespares.com.au/product/stabilizer-door-glass-inner-new-8032404u03/?srsltid=AfmBOop6L5EgUFaHPHiVXoAhv5k8aJYwc77nGmoApp-hY03OiOsNVaOv Thanks 
    • I'm wondering is the Toyota and Mazda "collaboration" could see that new Toyota ???G20 ??? turbo engine that they have been showing off recently into a future MX5, apparently it's good for 400hp out of the box That could easily, possibly, be much better than the last collaboration between Toyota and Subaru with the boxer engine in the twins
×
×
  • Create New...