Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Your probably right, but the specs as I quoted them for the L20ET are right.

I just transfered all my L20ET bits onto an L24E with the FJ20 turbo and it's heaps different in size (rear housing)

what ecu are you using, and is she alive??

The L20ET one & Yes it is!

Don't have a choice, only L series turbo ECU I have.

As I said before L24E ones are good for landfil.

Why? you offering an alternative?? :ghost:

no, unless you want to look at a wolf3d?? it's just i have all the bits sitting here to do the L24et thing but not the time..was going to spruce up the MR30 hatch with the turbo gear and sell it.. would there have been a different ECU for the L28et engine?

FJ20's came with T28s and T3s.RB20's are T28s,and RB25s are more of a T3.

I had the stock L20ET ECU running my L24ET,and believe me,they're over fueled enough to run a 3L!!!!

can i ask how the L24et went? also with the rb20's was there any difference from red top to silver top with the turbo mounts?

can i ask how the L24et went?

Very nice round town.I had a worked 3 spd auto behind it,with VL stall.Very "zippy" for lack of a better word.Hit the loud pedal,and she was back a gear and of you'd go.Top end wasn't huge,but everything else was pretty much stock,7psi,and no intercooler,so I thought it was pretty respectable.

Got 15.1 (and 96mph?) on G-tech,but most of that was cause of the launches!

Stand on the brakes and the throttle,get 5 psi on the dial,then hop off the brakes and you're in squat heaven! :O

Very nice round town.I had a worked 3 spd auto behind it,with VL stall.Very "zippy" for lack of a better word.Hit the loud pedal,and she was back a gear and of you'd go.Top end wasn't huge,but everything else was pretty much stock,7psi,and no intercooler,so I thought it was pretty respectable.

Got 15.1 (and 96mph?) on G-tech,but most of that was cause of the launches!

Stand on the brakes and the throttle,get 5 psi on the dial,then hop off the brakes and you're in squat heaven! :)

That's pretty interesting, my L24ET will also be non intercooled but with L20ET ECU, but trying a L24E AFM and maybe throttle body, depending on which is the larger plus the T3 FJ20DET turbo and 5 speed man transmission.

Should make an interesting gadget to sell, as my MR30 hatch is a fully optioned Ti with the addition of the PNV interior, & grey dash.

Surely it will be a one off, RED with Grey/Black interior. All OZ delivered reds were brown interior.

As a matter of interest! does anyone know the differences of L series 6 cylinder engines?

Is their hieghts the same or does it increase as the capacity increases?

How far can the L20 be stretched etc, etc.

hey, i think you would find that information on one of the "Z car" websites. The yanks are really into the big "L" series motors. L28.

anyhow, my dad found a really interesting program on the net. it showed what could be done, by mixing the parts from all of the "L" seies motors. (Showed, bore, stroke, compression etc.)

Ill find it and make an attachment soon.

well, spose you drive a v8 commodore or something.

Cos only cheap wine comes in 5 litres. :)

That's well put Mick, but all these dicks have a different thing to say when the 2L is kickin the 5L's ass.

I had a 1750cc Hillman Hunter years ago and on the way back from the snow at 125mph a 5L SLE C'dore couldn't go past me. Could catch and sit on my rear in my slipstream, but when he pulled out to go past, he went backwards.

I only had 165 HP at the fly.

Re that program, PHaT in Tassie has the same I think, but I will do a google search and see what it produces.

Tah :ghost:

just got the HPI DVD #8 and theres a small bit of R30 action at the drags :aroused: mate it was brillant, dos'ent tell you much about the engine set ups but they were putting down mid 11's one got into the 10's :wassup: all running fj's, just for that part alone it was money well spent i give it 3 thumbs up...

theres a BIG (50+ cars)skyline cruise tonight hopefully as its rainning at the moment but i've been to a few in my r31 and there great!!

Is the any wreckers that anyone knows of who have interior pieces such as air vents and side mirror covers for the R30??

what colour interior do you have as i have a mr30 sitting here with baby sh%t brown interior?? side mirror covers are black ofcouse..

Re R30 Fronts!

I have come to the conclusion, after studying both for most of today, If you want to use the Tekamon bonnet with stock headlights, a modified (cut down) stock grille would have to be used, primarily due to the impossible task to remove the chrome trim from under the headlights. To keep uniformity, the cut down stock grille would have to be used.

The Tekamon front was designed to improve aerodynamics, so if the plan is to have a quick car the Tekamon front would be the obvious choice, but if show is more your go, then the stock front is probasbly best.

I will post pics in due course

Or to put another slant on it,just for discussion sake,cause I'm bored,if you stuffed an RB series 6 in there,the stock style front would be better for cooling,as it would allow more air flow to the radiator,as the bay's are pretty full with an RB in there,and hold a bit of heat.

I guess you could also say the same for a big front mounted intercooler...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
×
×
  • Create New...