Jump to content
SAU Community

Recommended Posts

ok if anyone is interested i have Z32/R32 brakes im thinkin of selling, probably pointless trying cos u guys could get them cheaper than the inclusion of freight.

but they are 280x32?? and the caliper is alloy not steel. they have had the Nissan logo ground off to slightly improve the clearance problem.

i am thinking of going the R32 GTR/R33 GTSt option.

ps CA18 250mm rotors DO NOT PULL UP A RB25DET powered silvia from 80kmh very well at all!!!!

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

oh and by the way my MR30 has had the brakes upgraded on the rear for what i believe is a hatch, had the cross member swap etc. makes a huge difference over a drum rear end so i think they are good enough

would'nt it just be a stright swap for the IRS system?

anyone know of anyone looking to buy a unfinished project car, its red and black comes with a working installed rb20det, low kms, new seats, big fmic, auto meter gauges new running gear and suspension...PM me... :D

Hey Guys,

Just an update, got the front and rear pad numbers, can get pads no worries, can hopefully get the discs machined.

HOWEVER...the handbrake cable is seized solid, and new ones are $121.75 for the left and $108.10 for the right. Has anyone here got a handbrake cable that isn't ****ed that isn't on a car that they wish to sell or something?

oh and would you believe that the guy from spare parts in Nissan didn't know what an FJ20 is?!!!!

would'nt it just be a stright swap for the IRS system?

anyone know of anyone looking to buy  a unfinished project car, its red and black comes with a working installed rb20det, low kms, new seats, big fmic, auto meter gauges new running gear and suspension...PM me... :cheers:

What's the go Matt?

Not going to finish your project?????

What happened to the re finance etc, etc.

D

What's the go Matt?

Not going to finish your project?????

What happened to the re finance etc, etc.

D

oh thats still going ahead, its just i have the found a new toy today and it involves letters like gts-x rb and 26dett nismo 2 seats and a roll cage :headspin:

hehe is that the 17k one? that looks cool. lucky bugger. i wouldnt mind RB26'ing my DR30 one day! if i get a proper job and lots of money ill see what happens! haha

stopped into the suspension joint today to check out my front suspension coz that knocking was really starting to shit me ... needs

Lower Control Arm bushes

Radius Rod bushes

Idler Arm bushes

so im getting all those replaced with polyurethane ones, costing $500.

but also noticed my steering box is leaking ... needs a rebuild and shit which is $500 also :wave: bugger. hhaha. looks like intercooler is back another month or two again! need that tax return!!

*continues filling out the sign-up form for his Virgin Credit Card* >:cheers:

rsx84 - yeh a mate of mine posted it on a chat room and i had a good look at all the pics n info. be a pretty damn nice car :cheers: so is it definately yours then ?

Neo - haha its hard to compare i guess coz true, an RB26 is like 6k + install and stuff ... throw 6k at the FJ and itll probably be indestructable and bloody move too .. mind you it'll probably use more fuel and be less everyday-driver friendly too ... but really all i want is 350rwhp and a good all round package .. no need for gimmicky tt setups and stuff i spose! haha

always remember the silver Zeni Tan DR30 that had the 26 in it up for auction a while ago on Prestige i think it was ... wasnt that much either but i cant remember exactly how much. low teens i think.

mind u that 31 looks almost as cool ... but id **** off that GTS-R wing ... if it was a real gts-r i see the sentimental value of it, buit otherwise its just bloody ugly i reckon!! haha

this is what i'm willing to give my r30 for!! ANT did you read the list of work done  :headspin: what a weapon a rb26dett dr30 would be!!!! :wassup:

Is that what's turning you on?????

There a BRICK! 1300+ kg, but your choice.

Bet it won't be as quick as mine, RB26DETT and all it's mods.

The HR30 will reign supreme.

']hehe is that the 17k one? that looks cool. lucky bugger. i wouldnt mind RB26'ing my DR30 one day! if i get a proper job and lots of money ill see what happens! haha

stopped into the suspension joint today to check out my front suspension coz that knocking was really starting to shit me ... needs  

Lower Control Arm bushes

Radius Rod bushes

Idler Arm bushes

so im getting all those replaced with polyurethane ones, costing $500.  

but also noticed my steering box is leaking ... needs a rebuild and shit which is $500 also ;) bugger. hhaha. looks like intercooler is back another month or two again! need that tax return!!  

*continues filling out the sign-up form for his Virgin Credit Card* >:cheers:

Don't replace the lower control arm bushes with anything but RUBBER! keep all PIVOT points RUBBER, the others can be Urethane, but don't get sucked in to believing it's the be all end all, talk to some rally guys and they will tell you the same.

They promote Urethane because of the HUGE profit margin they get from it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The nissan manual says to change coolant every 2 years. Is this still necessary if you're using coolant like Penrite or nulon which has improved over the years? It says it lasts 500,000km which seems hard to believe lol.
    • According to the Muse website, totally different material. The originals were that horrible solid foam rubber that was used for a lot of rear spoiler/flap things, like on Mitsu Galan GSRs. Heavy, and with enough compressibility/flex that any paint on them would crack fairly quickly. The Muse ones are just ABS, which is obviously similar to GTR lower front lip, etc etc. ABS is a good choice if you have the ability to tool up for it. The only thing better might be TPU-RIM or something equivalent. The TPUs were good. Plenty of flexibility (in twisting, bending, etc) but not really in compression.
    • Update 24/01/2025:    Bought a GReddy/Trust Intercooler (crossflow spec-LS) that was meant for a R33 GTST $871 AUD shipped, and a GReddy Profec boost controller $483 AUD, both brand new from Japan. Being honest, I would've thought the intercooler kit was discontinued but I guess not yet. Decided due to funds + time, I'll stick with a nistune on this stock-ish setup ( stock turbo set to probably 10-12psi ) and have it run cleaner ( suspect the 3" turbo back etc has sh*tted on my economy ) for my trip down south soon for the WSBK. Hopefully I can get it all installed and tuned by then. As for who I am getting it tuned with, I will be going with Toshi, (not hearing back from DVS so scratch that). There is also Birrong Auto but not sure if they do nistune installations and if they even tune it... Otherwise, anyone know where I can get my hands on an aluminium intake/suction pipe for an RB25DET NEO?
    • The german cars I've worked on seem to have that issue(in more than just headlights). Mostly where hot, but also just the insulation hardening and cracking in various places. Not abnormal from what ive seen.
    • According to the Muse website, similar material, but not the same. Meant to help with stopping the paint cracking. In saying that, I had genuine ones on my last grt, and never had that problem.   Could you post pics when you get them? Very much thinking of buying the Muse ones over fibreglass.
×
×
  • Create New...