Jump to content
SAU Community

Recommended Posts

ok if anyone is interested i have Z32/R32 brakes im thinkin of selling, probably pointless trying cos u guys could get them cheaper than the inclusion of freight.

but they are 280x32?? and the caliper is alloy not steel. they have had the Nissan logo ground off to slightly improve the clearance problem.

i am thinking of going the R32 GTR/R33 GTSt option.

ps CA18 250mm rotors DO NOT PULL UP A RB25DET powered silvia from 80kmh very well at all!!!!

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

oh and by the way my MR30 has had the brakes upgraded on the rear for what i believe is a hatch, had the cross member swap etc. makes a huge difference over a drum rear end so i think they are good enough

would'nt it just be a stright swap for the IRS system?

anyone know of anyone looking to buy a unfinished project car, its red and black comes with a working installed rb20det, low kms, new seats, big fmic, auto meter gauges new running gear and suspension...PM me... :D

Hey Guys,

Just an update, got the front and rear pad numbers, can get pads no worries, can hopefully get the discs machined.

HOWEVER...the handbrake cable is seized solid, and new ones are $121.75 for the left and $108.10 for the right. Has anyone here got a handbrake cable that isn't ****ed that isn't on a car that they wish to sell or something?

oh and would you believe that the guy from spare parts in Nissan didn't know what an FJ20 is?!!!!

would'nt it just be a stright swap for the IRS system?

anyone know of anyone looking to buy  a unfinished project car, its red and black comes with a working installed rb20det, low kms, new seats, big fmic, auto meter gauges new running gear and suspension...PM me... :cheers:

What's the go Matt?

Not going to finish your project?????

What happened to the re finance etc, etc.

D

What's the go Matt?

Not going to finish your project?????

What happened to the re finance etc, etc.

D

oh thats still going ahead, its just i have the found a new toy today and it involves letters like gts-x rb and 26dett nismo 2 seats and a roll cage :headspin:

hehe is that the 17k one? that looks cool. lucky bugger. i wouldnt mind RB26'ing my DR30 one day! if i get a proper job and lots of money ill see what happens! haha

stopped into the suspension joint today to check out my front suspension coz that knocking was really starting to shit me ... needs

Lower Control Arm bushes

Radius Rod bushes

Idler Arm bushes

so im getting all those replaced with polyurethane ones, costing $500.

but also noticed my steering box is leaking ... needs a rebuild and shit which is $500 also :wave: bugger. hhaha. looks like intercooler is back another month or two again! need that tax return!!

*continues filling out the sign-up form for his Virgin Credit Card* >:cheers:

rsx84 - yeh a mate of mine posted it on a chat room and i had a good look at all the pics n info. be a pretty damn nice car :cheers: so is it definately yours then ?

Neo - haha its hard to compare i guess coz true, an RB26 is like 6k + install and stuff ... throw 6k at the FJ and itll probably be indestructable and bloody move too .. mind you it'll probably use more fuel and be less everyday-driver friendly too ... but really all i want is 350rwhp and a good all round package .. no need for gimmicky tt setups and stuff i spose! haha

always remember the silver Zeni Tan DR30 that had the 26 in it up for auction a while ago on Prestige i think it was ... wasnt that much either but i cant remember exactly how much. low teens i think.

mind u that 31 looks almost as cool ... but id **** off that GTS-R wing ... if it was a real gts-r i see the sentimental value of it, buit otherwise its just bloody ugly i reckon!! haha

this is what i'm willing to give my r30 for!! ANT did you read the list of work done  :headspin: what a weapon a rb26dett dr30 would be!!!! :wassup:

Is that what's turning you on?????

There a BRICK! 1300+ kg, but your choice.

Bet it won't be as quick as mine, RB26DETT and all it's mods.

The HR30 will reign supreme.

']hehe is that the 17k one? that looks cool. lucky bugger. i wouldnt mind RB26'ing my DR30 one day! if i get a proper job and lots of money ill see what happens! haha

stopped into the suspension joint today to check out my front suspension coz that knocking was really starting to shit me ... needs  

Lower Control Arm bushes

Radius Rod bushes

Idler Arm bushes

so im getting all those replaced with polyurethane ones, costing $500.  

but also noticed my steering box is leaking ... needs a rebuild and shit which is $500 also ;) bugger. hhaha. looks like intercooler is back another month or two again! need that tax return!!  

*continues filling out the sign-up form for his Virgin Credit Card* >:cheers:

Don't replace the lower control arm bushes with anything but RUBBER! keep all PIVOT points RUBBER, the others can be Urethane, but don't get sucked in to believing it's the be all end all, talk to some rally guys and they will tell you the same.

They promote Urethane because of the HUGE profit margin they get from it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
    • These look like S13 wheels.  And Welcome! 
×
×
  • Create New...