Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by PSIKO

Sort the rest of your exhaust out

fmic  

boost controller + guage  

bigger, steel-wheeled turbo  

bigger pump  

new management

Basically what PSIKO said the route that i took was:

Apexi SAFC plus Apexi ITC = $850

Dump and down pipe from turbo = $350ish

Go the Front Mount Intercooler = $2000 - $2500

electronic Boost controller $500

boost gauge $200

HKS CAM GEAR = $350

prob be pulling about 270 - 285 rwhp from that or in holden terms (:P) about 280 Kilowatts (from engine)

Rest of money that you may have left over would go into proffesional dyno tuning and installation of these products.

Using website like www.nengun.siteblast.com

and www.takakaira.co.jp can sive you some money.

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-546927
Share on other sites

AFC + ITC + EBC? That costs about $1700-$2000 plus fitting and tuning you could drive away with a Full plugin ECU tuned etc for around $2000 that will do all this and more.

GTSs only need the exhaust gear at around $180

Hybrid coolers are hitting the market in weeks for about $1000

from Works and PER4MANZ.

All the good go fast parts are coming down in price because of the size of the Jap performance market world wide so their fun times ahead at a good price, we will have a huge list of wild parts

soon( About 4 weeks) at mega cheap price and all parts will be priced in Australia with Australian warranty- no risk of customs probs.

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-547103
Share on other sites

Originally posted by Steve-SST

AFC + ITC + EBC? That costs about $1700-$2000 plus fitting and tuning you could drive away with a Full plugin ECU tuned etc for around $2000 that will do all this and more.

GTSs only need the exhaust gear at around $180  

Hybrid coolers are hitting the market in weeks for about  $1000

from Works and PER4MANZ.

Geez I am always buying at the wrong time! Quite right in saying about the AFC ITC EBC combo, There have been plenty of 2nd hand ones for sale on the forums though which seem to have been OK, I bought the ITC and the EBC 2nd hand so the total of all three came up to about $1300 but obviously not as many control points as a full ecu.

My intercooler eneded up costing a bit but judging from Grants reaction at per4manz on the intercooler it was well worth the money he was quite impressed with it! talking about per4manz i have seen some of his intercoolers, if any you guys are thinkning of getting one and if he has some coming in at $1000 snap them up! grant and steve have done some pretty nice installs down there!!

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-547186
Share on other sites

Originally posted by HIPSI

Thanks 4 the info guys, i was told that i should go the bigger intercooler first since during summer you can lose power.

Is this true?

I have a TurboSmart boost controller in the engine bay, got told that these dont hold boost levels very well?

Ummm for power i went intercooler last, intercooler doesn't add much power so to speak but the turbo friggin loves it heaps better reaction and everything it was sweet! just in summer perhaps don't raise boost over 10psi just for safetys sake perhaps 12 at the most.... running boost at 1 bar (14psi) in middle of summer on a 40 degree day is asking for trouble.

I recon go intercooler last, get the ecu dump pipes etc done 1st, I am sure REV210 willl agree with me on getting the front mount last, he was running VERY low 13's quarters with standard intercooler. but had spent a bit on suspension and tuning.

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-547301
Share on other sites

All you need is a bigger fuel pump, a bosch 910 will do nicely, they cost $220. gtst-vspec and my injectors are still going well, his is making 368hp and mine currently 344hp (un-tuned, will be tuned next week). So what else about the fuel system needs doing? Paul's car has reasonable traction on his bald tyres, I've got a set of 225 dunlop sp9000's and I hardly have any traction troubles, however thats $700 worth of tyres for just the rear end, so his budget will be blown.

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-547724
Share on other sites

dont put a GT30 on with a 5,000 budget

you need the support systems first like intercooler, management, fuel system. dont just throw on a big turbo.

id start doing the whole exhaust. then front mount and full management.

but be prepared to replace your clutch and fuel pump as well and already youre up around the $5,000 mark once its all tuned and fitted.

Link to comment
https://www.sau.com.au/forums/topic/25768-best-mods-4-5000/#findComment-547847
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...