Jump to content
SAU Community

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

FMIC on standard turbo is crap.

When i had mine fmic fitted to standard turbo ( i also had SAFC) - it destroyed the car..... was a much nice and quicker car to drive with standard IC. I decided to piss the car off instead of replacing turbo and the like.

It just left aq bad taste in my mouth.

Daniel

Paul,

YOu know people buy kidneys/internal organs for large sums of cash! (read: 25k for a kidney!) now there's a gauranteed source of income....

until you run out of shit to sell.....

mmm, embalmy!

If im older and I don't need mine, im putting them on eBay!

yep .... just wasnt happy with it, had comp retuned and few other times tried to make it "nicer" but in the end i just didnt like it.... so waved the bitch goodbye.....

Daniel

PS - thanks Kim for the compliment. ;->

Originally posted by adam 32

macka has run a 12.98 on one of your crappy 'high-flowed' turbos which still stands as the fastest R33 gtst on the forum i believe. he makes full boost by 3500rpm which alot more driveable than the 4500rpm lagmonsters going around today. do some research cos i believe you are the one 'dribbling shit'

So you've obviously talked to macka to find that he's had months of issues finding the right match of compressor/exhaust housing's to compressor/exhaust wheels. He's also had issues with compressor surge, so all the time and money he's spent dont you think it would have been easier to just buy an aftermarket turbo? Go for a drive in paul's car and tell me its a lag monster... just remember to bring a spare pair of jocks.

does the name GCG turbochargers mean anything to you? i dont think they would be so successful if high flows were so 'shit'... there are plenty of people making 350 at the wheels with alot better driveability on these high flows.

back to the original argument tho, have we all agreed now that for 5,000 you cant replace the turbo.

How much do GCG charge to "hi-flow" a turbo?

Nissan GTS-T R32 & R33 Upgrade of Standard Turbocharger:-

The factory turbocharger is a ball bearing T3 sized unit with a ceramic turbine wheel. In upgrading this unit we replace the ball bearing pack with a new one while replacing the turbine wheel and compressor wheel with hi-flowed models. The upgrade comes in two stages.

XTRGTST-STG1 450hp rated $2250.00

XTRGTST-STG2 500hp rated $2450.00

Taken direct from their site. Oh gee, why dont I send off my turbo and for $2250 I can get it "hi-flowed" to 450hp... get real, you're best of buying a gt28 or a gt30.

hey adam try toning down your comments and stop being so confrentational!

and just so you know macka doens't have the fasts R33 gtst

that goes to some guy in qld who has run a 12.8

then theres the vic guy whos run an 11 but hes has a

hks worked rb26 in the engine bay.

Originally posted by adam 32

macka has run a 12.98 on one of your crappy 'high-flowed' turbos which still stands as the fastest R33 gtst on the forum i believe.

Actually you gotta do a helluva lot better than a 12.98 in a GTS-T to be at the top of the list nowadays. Take a look at my thread here (http://www.skylinesaustralia.com/forums/sh...&threadid=22444)

R33 GTS-T

01. 12.260 = Buster (1.85 60ft, 118.30mph)

02. 12.380 = matlowth (2.38 60ft, 123.45mph)

03. 12.408 = WET33 (1.98 60ft, 111mph)

04. 12.412 = Merli (2.03 60ft, 114.47mph)

05. 12.900 = BOOSTD (2.2 60ft, 111.49mph)

06. 12.988 = macka (2.25 60ft, 113.35mph)

That 12.260 was done with ~320rwkw with more power to go so a 12-flat isn't far from happening. It looks like Macka has the power just not the traction to put down a -really- good time. If he could get a 2.0 60ft a 12.5 would be on the cards. Still though I personally would be happy with any <13.0sec daily driven GTS-T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PULSAR PSR2860R 0.86A/R or 0.64 GEN 2 Turbocharger Both are -50*67mm 8 blade billet compressor wheel Cheers  
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe.....EDIT... nope, the Kraken is a cast jobbie, the REv9 uses welded up stainless, plus $8000 AUD before shipping, installation and tuning) Where else in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit that Pulse fitted, and it was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe), where in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit, and was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet  
    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
×
×
  • Create New...