Jump to content
SAU Community

Recommended Posts

Hey guys, recently i got an exhaust fitted to my car, it is a 2.5inch cat back with a 4inch canon, when it is cold it makes a loud clicking noise, not a mechanical problem, it just makes it sound like a old corolla with a shitty exhaust. is this due to loss of air flow? even though the pipe is only 2.5inch...? anyone get this sound from their exhaust? anyone know what causes it? shouldn't it be a deep tuff sound? :blink:

Link to comment
https://www.sau.com.au/forums/topic/258232-exhaust-clicking-noise/
Share on other sites

Could be because it is a new exhaust. They take awhile to "bed" in. Some have a burning smell, some make noises.

So you're saying i should just give it some time and not worry too much?

Clicky sound? or is it more like a rasp around 3500 revs?

Haven't measured what revs it happens around, i'll have a look tonight, i'm pretty sure that it is the note it is giving out though.

Anyone else?

i also have a 2.5 inch cat into a 4 inch canon

i get it aswell

its around 3500 rpm and stops about 4000

however if i give it the beans it goes all the way untill 7000

i will take a video and youtube it for example tonight if im bored enough and post it.

i have been told that most NA skylines will get it and it something to do with the resonator.

p.s i recon it sounds tough when it goes to 7grand just getting faster n faster.. its something different.

Edited by SKYL1N

:)

http://www.skylinesaustralia.com/forums/Rb...alic+resonating

You dont have to deal with it guys!.. just dont buy cheap generic exhausts! They will do nothing for it but make it worse!

Edited by GTS4WD
  • 8 months later...

Last year, I had to move to a new place where now I am living. It was very far and where I had no TV to watch and no film to see and no library to read. I had nothing else to do. Life then to me was like a desert.

wow power leveling

However, to my great surprise, I found a web bar, which was very far from the place I lived. I entered the bar that day. It was from then on that I began to immerse(使陷入)myself into Internet.

wow gold

When I first came into the bar, I didn’t know how to access the Internet. With the help of others, I opened a homepage(主页), finding it was full of colorful and rich contents. How interesting it was!Clicking the mouse, I set up my own e-mail address under the guidance. I read sports news, entertainment news and all kinds of much other information.

I was becoming happier and happier. On holidays I sent e-cards to my friends to express my greetings. I also bought several books through e-business and ordered free e-magazines, which were of much help to my study.

wedding dress

Hearing that finding a job on Internet is very efficient, I am ready to have a try.

wedding dress

I was and am being benefited from the Internet, which makes me realize that the quality of life is as important as life itself. With the company of the Internet, I will never feel idle(闲着的) any more

wedding dress

Someday in the future we may not need to have money in our pockets. Is life easier when people don’t need to carry any coins or currency at all? Is money heavy to carry? Is it safe to carry money? Maybe in the future each of us will have only one small plastic credit card. We will use it to buy all the things we now buy with money. We will not need money to pay for things.

wedding dress

Of course we may still have some of the same problems with cards that we now have with money. Sometimes we lose money. Maybe we will lose the card. People steal money. Maybe someone will take the card. Someone may even make a card that looks like our card. Since we can’t buy anything without our card, the credit card may be no better than currency. 

Is there something even easier to use than credit cards? All of us have a thumbprint. No two thumbprints are the same. Maybe someday the government will keep people’s thumbp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are a few different ways of doing it. I'm currently running two 1000cc pre-TB nozzles and PWM the pump for control. I'll be moving over to a constant pressure system and direct port. I'll run the pump off a regular relay, have it cycle on roughly 5psi before I start injecting to build pressure and then PWM a WMI solenoid (It's basically an injector that can take a lot of pressure and not corrode with water and meth.) The solenoid feeds the 6 direct port ~200cc nozzles. I'll also keep one ~250cc pre-TB nozzle to help keep IAT's in check.  Safety will be a little different as well. I used to use a pressure switch but will be moving over to a pressure sensor between my solenoid and nozzles. I'll trigger my solenoid and if I don't see specific pressure within a specific timeframe (e.g 100psi within a second, 175psi within 2 seconds), I kill it and revert back to non WMI maps the same way I did it before with 4D in Haltech. I was just figuring out the timers in my ecu last night. They made that a little more complicated than I would have liked... I wish Haltech offered a larger set of logic/math functions like other ecu's do. I can't do very much with just AND's and OR's.  I've been asked to do fuel/ignition mapping on a medium bore engine at work in May (192L V16). Being the only programmer in my region and having went and opened my mouth about knowing the ins and outs of fuel/ignition mapping, I have now been deemed an expert. Fun fun. The entirety of the logic and algorithms are programmed in C on a PLC. As I spend more time figuring it all out, I like what I see and eventually I may consider doing the same as a pet project to replace my ecu.   
    • This would be interesting, would you feed it via a 2nd row of injectors? Or just usual WMI nozzles?
    • Cut sump up and extend. Win win 😂 
    • All, What's the recommended torque for the 1/2 head studs for RB30 twin cam conversion with RB26 head?  
    • also, we need to know which solution worked....
×
×
  • Create New...