553.5kw At 4 Wheels Pump Fuel

[superjet760]

As i said before the car drives really well for the power it makes.we all know you cant use 550kw on the street so as for anything over 350kw being usless your right.

But i built the car to race on a wed night street meet at the drags on radial street tyres.

No its not a race car if anyone wants to go for a cruise im more than happy to go

Paul i dont know why they didnt have it in shoot out mode ill ask and let you know

Thanx

Edited February 23, 2009 by superjet760

[Guilt-Toy]

i just cannot see how that car could be usefull in getting good times on the drag strip. I would like someone to explain it to me if possible.. (serious request)

[N1GTR]

How will it be at a drag strip?

Old school vid, same turbos, 2.6L though

Fast forward to 4.26

It will be a monster

Whats the time limit bfore WSID boot people out? 10.00?

[Dynamix]

i just cannot see how that car could be usefull in getting good times on the drag strip. I would like someone to explain it to me if possible.. (serious request)

If that japs were getting good times with a smaller capacity then the 3L motor here then why won't it work is the question, the car still has a full boost band of 4,000 rpm which at this stage for a " street tune " is more than enough, coupled with the power and extra torque from the larger cc motor is should do very well?

[Smitizen]

"That's a huge b#tch!"

[Guilt-Toy]

any chance of getting a torque read out for that run as well and posting it?

[Guilt-Toy]

How will it be at a drag strip?

Old school vid, same turbos, 2.6L though

Fast forward to 4.26

It will be a monster

Whats the time limit bfore WSID boot people out? 10.00?

but does it have such a narrow band of power?

[N1GTR]

I doubt it will be exactly the same, the RB30 would make a big difference, thats more of a rough idea

[Sheng]

Wow! Nice work, Yeha same question with Dave, how would that thing drive on the road?

[Guilt-Toy]

How will it be at a drag strip?

Old school vid, same turbos, 2.6L though

Fast forward to 4.26

It will be a monster

Whats the time limit bfore WSID boot people out? 10.00?

i soo enjoyed that video

[N1GTR]

Oh yeah, its golden!

Dont forget to watch part 2, it will be in the related videos panel

[N1GTR]

Superjet760; When will you be at WSID for a run?

[Owgasm]

thats a nice video.

1998 32 gtrs, where are they now. 1000hp back then, 10 years later... whatnow?

[GTR-32U]

As i said before the car drives really well for the power it makes.we all know you cant use 550kw on the street so as for anything over 350kw being usless your right.

But i built the car to race on a wed night street meet at the drags on radial street tyres.

No its not a race car if anyone wants to go for a cruise im more than happy to go

Paul i dont know why they didnt have it in shoot out mode ill ask and let you know

Thanx

Hell I am happy to go for a cruise !!!!!!. You drive, I ride shotgun in the passenger seat.!

But fantastic result and a Gorgeous car

[SilverCal]

i just cannot see how that car could be usefull in getting good times on the drag strip. I would like someone to explain it to me if possible.. (serious request)

Well with some well suited ratio's in the box and diff and getting the power to the ground without wheelspin is the way it will cut a good time at the track! Just because it makes huge power later in the rev range doesn't make it worse off, you just have to match the power & revs to the right gears and tyres..

[and3_3]

rev limit 9000 rpm on standard crank? Be careful with that man...

[Lithium]

rev limit 9000 rpm on standard crank? Be careful with that man...

RIPS has been known to spin his up to near 10,000rpm - his 240Z's RB30 has been running standard crank for as long as it has been running and it started off in the 10s and has been working through to low 8s with a LOT of runs under its belt, the stock cranks seem to do ok with proper care etc.

Check this out:

[Dynamix]

RIPS has been known to spin his up to near 10,000rpm - his 240Z's RB30 has been running standard crank for as long as it has been running and it started off in the 10s and has been working through to low 8s with a LOT of runs under its belt, the stock cranks seem to do ok with proper care etc.

Check this out:

2nd that, they've been running consistant low to mid 8's with a stock crank, have been for a while now, their car and other customers cars over 1000hp are also running stock cranks and reving to high numbers, and they've never had an engine failure, ever, just goes to show the rb series cranks can handle some spin when prepped right!

[Roy]

Did you happen to buy the head of a forum member or did you get RAMS to build it up for you?

[WHITER33GTS-T]

Whats the cost of one of these RIPS engine packages??

Good numbers and sweet ride.