Jump to content
SAU Community

Recommended Posts

i just sourced an r34 rb26 soo i will be selling/parting out my 607rwhp rb25 to upgrade to a big borgwarner turbo and 9k rpms big 280 cams single stage external oil pump etc etc but i have my tomei rods on my engine i know i can use but can i use my cp pistons from my rb25 on the 26?

Just looking at the ACL site, it shows that the RB25 / RB26 pistons are different in 2 areas:

Crown volume - RB26 = 16.3cc, RB25 = 11.5cc

Comp Height - RB26 = 30.3mm, RB25 = 31.3mm

I think the Comp Height difference means you will smash a RB25 piston into the head of a RB26, because the piston sits higher on the gudgeon pin / small end.

I would imagine most others are the same.

And RB265 / RB26 have different stroke, so you probably can't use the same rods either.

Just looking at the ACL site, it shows that the RB25 / RB26 pistons are different in 2 areas:

Crown volume - RB26 = 16.3cc, RB25 = 11.5cc

Comp Height - RB26 = 30.3mm, RB25 = 31.3mm

I think the Comp Height difference means you will smash a RB25 piston into the head of a RB26, because the piston sits higher on the gudgeon pin / small end.

I would imagine most others are the same.

And RB265 / RB26 have different stroke, so you probably can't use the same rods either.

well your totally wrong about the rods they fit either engine, the rb26 has 2 more mm's of stroke but it has 1 mm less of compreson height, and the dome cc's compensate for the extra mm of stroke thats my theory ive talked to soem engine builders in the states and they told me ill be fine i entered all the calculations on my engine calculator shows 8.1 compresion just want to knwo if thiers something im missing or if thiers something that wont fit

well your totally wrong about the rods they fit either engine

Why ask if you're going to research and find the answer yourself???

ive talked to soem engine builders in the states and they told me ill be fine

Big mistake.............Good luck! ;)

You cannot use the rb25 pistons in the 26, due to different deck height, comp height, gudgeon pin height.

I say we let him work it out himself as he's gotten some excellent advice................

Why ask if you're going to research and find the answer yourself???

Big mistake.............Good luck! :(

I say we let him work it out himself as he's gotten some excellent advice................

we'll see, and if you look at my first post i never asked if my rods would fit i know my rods fit they are rb26 rods no brainer thier suposedly with a stock height head gasket and the 25 pistons i should be at 7.8 compresion and if you dont want to help me im prety sure thier are other people who know more then you on this forum :) to bad all my aussie freinds dont know crap about rb26's heh talkinga bout you antony 2rismo rezlo cjmark

oi.. Raegan is a cool dude. He has been through some bad shit more then most of us put together. Nothing wrong with Peru, i would go there.
log on msnger fool i want to talk to you
to bad all my aussie freinds dont know crap about rb26's heh
well your totally wrong about the rods they fit either engine

lol he's TOTALLY wrong? heh ur arrogant..

Yup, a good bloke.........

He may have been through some shit man, but it doesn't excuse talking to people like shit trying to help him.

He's getting advice, he should be thankful and not take what he's being given for granted, even if his mates in the US know everything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just as long as it's not those putridly disappointing RE003s.
    • I had this same experience going from a set of no name tyres that were on a set of good wheels (Enkei RPFs) to some Potenza RE-11s (this was a few years ago). The wet grip in particular was so much higher that it was almost scary considering how dangerous the old tyres were in comparison. The expense of the tyres also made me want them to last longer so drove accordingly. Wife happy. So now she only 'lets' me buy some flavour of Brigestones...
    • This. All of this. I am turning >$300 into small particles inside 20k km, because I like to be able to roll around any 90° street corner at the speed limit. Would my car be more fun with cheaper tyres? Possibly. When I swapped out the bald AD09s for new ones, the change in the car was massive. The obvious one was being able to put the power down instead of lighting up into silly wheelspin. But the corollary of that was that the lateral traction went from being fun to fast. It was more fun when it was loose. But the corollary to the corollary is that if I need to dodge a child in the road or emergency brake to avoid the arsehat who has just tipped a GWM on its side in front of me, then I've got a much better chance of that manoeuvre coming off without unintended "fun" meaning that I hit something else, or the original target.
    • Every time I have to buy new tyres I question what actual difference it makes between running $40 tyres and $300 tyres and whether it's worth it. Because that's a massive difference to the wallet. But then I did go to a driving training at some point which also included emergency braking and swerving in the wet. In part I think it was meant to show people how bad it gets. Funnily enough what I took away from it is that I can go much harder than I thought in my car. I presume mostly because of decent tyres. Some of the other cars there were shocking to behold. And a bit scary that cheap tyres are probably a lot more common on the road than decent ones  
    • I'm pretty sure that is just straight AI generated word soup, where did you receive that ad (facebook)? They misspell Pirelli twice, no human eyes looked at that before it was posted. Incidentally, I am running the chinese pirellis on my V37 and they are.....OK....I didn't go looking for them, they were just what the shop had in stock in the tall size that car needs. LIke any brand, you really can't trust the brand's reputation to apply to every product they produce. Pirelli make good and crap tyres, all with the same logo stamped on them, and all with an attempt at price premium due to the brand
×
×
  • Create New...