Jump to content
SAU Community

Recommended Posts

I have had a look through alot of threads and cant find anyone with this problem.

My Xenon lights have some marks in them that look like condensation, the stains or spots go along the entire headlight.

Has anyone come across this before, is there any easy way to open the headlight assembly and clean them ??

The headlights don't fog up, it just looks shitty.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/25842-xenon-headlights-in-a-33-gtr/
Share on other sites

Guest RedLineGTR

depends if its actual water/condensation or is it marks left over from past condensation? u cant open the headlight assembly they are pretty much glued together, some people have put them in the oven to get them apart a big job and not really worth it.

If thier is water/condensation in the lights then possbily take the globes out and leave them open so air and heat can get into them, best time to do it is on a hot day or something...either driving or letting the car rest either one should work.

BB GoDZiLa: Oh man I wish, when I bought my GTR I tried to find an LM every where, I had no luck- well actually i did find one but the guy wanted 90 grand............Ouch!!!!

When I saw that Pic I just had to have it !!

Jamezilla: A wire coathanger worked best for my lights, I did it last night, At first I didnt think it was making a difference but then I put a little degreaser on the rag the stains went away almost straight away. Try not to use a fluffy rag because it leaves fluff in side the headlight, but the good old vacum cleaner sorted that out I taped a hole series of plastic straws together and fed them inside the headlight then taped them to the pipe on the vacum cleaner and out came the small dust particles, it did get plugged a few times but it worked well.

canada: Wow - nice Macguver work :(

How did you get the hanger end inside the lamp fitting? Did you need to take them off the car?

Seems there are a few Xenon GTRs around now - we should have a mini-meet :D

I actually left them fitted, I just unscrewed the Xenon bulb, this left a large gap. It was a little akward to get into the far corner by the high beam and the the actual high beam bulb was to small to stick anything through.

Needless to say I removed my airbox, passenger side was easy.But on the drivers side I had to remove the window washer tank and the coolant run off tank- this may sound full on and even abit over board but it was hard to get the right angle with the coat hanger.

Mini meet sounds good where are you located ??

I'm in Epping/norther suburbs.

P.S. I cant imagine driving a niva after a rangie, do you ever take it off road??

Cool - sounds like a nice way to spend Saturday arvo. The dirty lamps have been bugging me for a while.

I'm in South Yarra.

One magazine once said of the Niva "Great off-road, best kept there" :(

Is loads of fun - just a smidge underpowered though. Very nimble - high angle of entry and exit.

ladabank_04.jpg

brownrussian2.jpg

Mine are factory fitted. Pretty sure Nissan replacements are about $2k each - not cheap.

You can get HID kits from these guys: http://www.hidlights.com.au - but I think it is a bulb conversion, not a gas-discharge unit as on the GTR.

Jamezilla:

Theres nothing better then a 4X4 covered in mud, have you ever had any electrical problems while river crossing or puddle bashing ??

My Rangie had 33 inch tyres and a 3 inch lift kit, but when ever i got close to water it would run rough, not to mention that most of the electricals would stop working as well.....good old british enginering ha ha.

BTW your niva looks tough, maybe a little small for me.

riggaP: not sure, I have a friend with a GTST he has the Xenon headlights but the car has a complete GTR kit fitted- and he

bought it that way, I will have a closer look tonight and post back here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah the ACL and similar formable heat shielding materials are really nice. But most people do not have the patience or talent to do a good job like that. Almost anything is better than nothing though. Even if you didn't form it closely like that and just had a slab of it slipped in between the manifold and somewhere/thing you wanted to protect, you would gain benefit. There has to be a market opportunity for people like Artec to make formed heatshields to suit their cast manifolds. The fact that they are cast means that they are consistently the exact same dimensions and they could add bosses to the castings like you see on stockers to allow heat shields to be firmly attached yet floating away from the manifold itself.
    • I've seen some stuff like this as well, not sure if it's a good idea or anything but it does have more standoff from the piping than the conventional fiberglass wrap:  
    • Jap premium will be 100 RON. You should use 98.
    • The exhaust gases are at their highest temperature as they leave the exhaust port and enter the manifold. They cool as they flow through the manifold because they transfer heat to the manifold and the manifold loses heat to the surrounding environment. Thus, inevitably, the exhaust gases are cooler as they enter the turbo compared to when they entered the exhaust manifold. So, yes, the exhaust manifold can easily get as hot as the turbine housing. Having said that, you will generally see the highest temperatures where the exhaust gases have to slow down or they are concentrated into one area - which is usually the collector on the manifold and in the turbine housing, because the gases slam into the metal at those places, increasing the convective heat transfer coefficient and transferring even more heat to the metal than they might just flowing past elsewhere. Exhaust manifold heat shields are a good idea - certainly for the stock manifold they are there from the factory. People seldom have anything like that on a tubular manifold because they are hard to achieve. Some might wrap a tube manifold with fibreglass tape - but this has a reputation of leading to cracked welds. The best case is generally to put ceramic coating onto the manifold to prevent it getting as hot (internal coating) and radiating/convecting heat into the bay (external coating). All the real heat from a turbo comes from the exhaust side. The gases entering are at ~800-900°C and the steel/iron gets nearly that hot. The compressor side is only going to heat the charge air up to <<200°C (typically not much more than 100°C). So that's nothing, by comparison. The compressor is not a significant source of engine bay heat.
    • Late to the party, specifically joined this forum as I just bought one of these and this thread has been a gold mine of info. If the OP is still around, mind if I ask what gas you been putting in yours? Mine has a Japanese sticker in the cap saying premium but it seems to get way worse mileage on premium (95) than 91. I always thought it was meant to be the other way round🤷 I do think Nissans claimed "6l/100km" is a bit fantastical 😂
×
×
  • Create New...