Jump to content
SAU Community

Recommended Posts

I have had a look through alot of threads and cant find anyone with this problem.

My Xenon lights have some marks in them that look like condensation, the stains or spots go along the entire headlight.

Has anyone come across this before, is there any easy way to open the headlight assembly and clean them ??

The headlights don't fog up, it just looks shitty.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/25842-xenon-headlights-in-a-33-gtr/
Share on other sites

Guest RedLineGTR

depends if its actual water/condensation or is it marks left over from past condensation? u cant open the headlight assembly they are pretty much glued together, some people have put them in the oven to get them apart a big job and not really worth it.

If thier is water/condensation in the lights then possbily take the globes out and leave them open so air and heat can get into them, best time to do it is on a hot day or something...either driving or letting the car rest either one should work.

BB GoDZiLa: Oh man I wish, when I bought my GTR I tried to find an LM every where, I had no luck- well actually i did find one but the guy wanted 90 grand............Ouch!!!!

When I saw that Pic I just had to have it !!

Jamezilla: A wire coathanger worked best for my lights, I did it last night, At first I didnt think it was making a difference but then I put a little degreaser on the rag the stains went away almost straight away. Try not to use a fluffy rag because it leaves fluff in side the headlight, but the good old vacum cleaner sorted that out I taped a hole series of plastic straws together and fed them inside the headlight then taped them to the pipe on the vacum cleaner and out came the small dust particles, it did get plugged a few times but it worked well.

canada: Wow - nice Macguver work :(

How did you get the hanger end inside the lamp fitting? Did you need to take them off the car?

Seems there are a few Xenon GTRs around now - we should have a mini-meet :D

I actually left them fitted, I just unscrewed the Xenon bulb, this left a large gap. It was a little akward to get into the far corner by the high beam and the the actual high beam bulb was to small to stick anything through.

Needless to say I removed my airbox, passenger side was easy.But on the drivers side I had to remove the window washer tank and the coolant run off tank- this may sound full on and even abit over board but it was hard to get the right angle with the coat hanger.

Mini meet sounds good where are you located ??

I'm in Epping/norther suburbs.

P.S. I cant imagine driving a niva after a rangie, do you ever take it off road??

Cool - sounds like a nice way to spend Saturday arvo. The dirty lamps have been bugging me for a while.

I'm in South Yarra.

One magazine once said of the Niva "Great off-road, best kept there" :(

Is loads of fun - just a smidge underpowered though. Very nimble - high angle of entry and exit.

ladabank_04.jpg

brownrussian2.jpg

Mine are factory fitted. Pretty sure Nissan replacements are about $2k each - not cheap.

You can get HID kits from these guys: http://www.hidlights.com.au - but I think it is a bulb conversion, not a gas-discharge unit as on the GTR.

Jamezilla:

Theres nothing better then a 4X4 covered in mud, have you ever had any electrical problems while river crossing or puddle bashing ??

My Rangie had 33 inch tyres and a 3 inch lift kit, but when ever i got close to water it would run rough, not to mention that most of the electricals would stop working as well.....good old british enginering ha ha.

BTW your niva looks tough, maybe a little small for me.

riggaP: not sure, I have a friend with a GTST he has the Xenon headlights but the car has a complete GTR kit fitted- and he

bought it that way, I will have a closer look tonight and post back here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One other thing worth mentioning when I did this job I only jacked up the driver side as I was only doing work there, but from what I understand both wheels should be in the air when removing the sway bar links?
    • Yep it's an r34. Usually people remove struts without removing the front upper control arm (fuca is what i assume this is?) So not sure why mine wouldn't fit. I know on my other car I did a similar job and it wouldn't fit until I removes the ball joint nut even though I didn't remove it prior.   The upper arm doesn't seem to be in the way (the part that's bolted to the chassis. The part that's bolted onto the j arm I'll check that out though.   I was going to compress the spring and put it in with the compressor attached but not sure if it will work  Haven't seen anyone do it.
    • I have a small lip on the boot of the E90 and I've been toying with the idea of trying to mould it in to the boot to remove the gaps. I guess shaving the seams? No idea what the terminology is here.  What I'm wondering is, if it's current double sided taped down, what would I do to more permanently attach it so it makes a good base for the filler? It only has edges so no way to bolt it down unless I add some braces. I've done a lot of fibre glassing in my time so that's nice and easy but I'm not sure what my options are here.  Sorry, this is the best pic I have and I'm 4 million ks from home ATM.  
    • Based on this comment I went googling. A052's in the sizes I want are certainly not cheap, but I couldn't find anything in the V70A anywhere. How much do they run/where do they get sourced from? From what I know (nothing but internet searches and reviews etc) the R888 has pretty much fallen off from anyone's actual use, and the AO52 is the king of "road legal" rubber. Nobody is driving around on their daily for Z221, AO050, DZ03G. At that point, for purely track only tyres - Why not buy actual slicks? Why does nobody actually do that anyway?
    • This an R34? It shouldn't matter though - it should be the same as on any of the others, and by "any of the others" I mean R32, because that is the car that I have had the front end apart on about 50 times this year. Sometimes, it is much easier to get the lower shock eye onto that pin when: a) you have the upper shock nuts backed off a few turns so you can wiggle it a bit more freely. When they are tight the bottom of the strut is much harder to move that _leeeetle_ bit you might need it to to win the fight. b) you have the outer bolt(s) from the FUCA out and so you can move the lower pin around freely too. Then, all you have to do is put the upper arm back on when you've got the rest back together, and this is where jacking under the balljoint can help.
×
×
  • Create New...