Jump to content
SAU Community

Door Lock Button

QWK32

By QWK32,
in Four Door Family & Wagoneers

 Share

Recommended Posts

QWK32 Veteran

QWK32

Posted
Posted (edited)

This is for the S2 guys, S1 might be the same, i don't know. when you push the door lock button on the drivers side door controlls, does it lock all the doors? mine locks all the other doors except for the drivers door?

Edited by QWK32
Link to comment
https://www.sau.com.au/forums/topic/258471-door-lock-button/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

the button on the window panel locks 3 doors. the drivers handle button is controlled by the keyless module.

manually pushing the drivers handle button locks all doors.

QWK32 Veteran

QWK32

Posted
  • Author
Posted

thanks chris, you might be able to tell me, where is the the lock and unlock signal wire for all four door, i can find the one that does the 3 doors and boot, but not the signal for all four?

how does the signal from the key, lock the drivers side door? i'm guessing the other doors lock once the drivers side one does.

Chris Rogers Grand Master

Chris Rogers

Posted
Posted

I'm not going to tell you but I will let you work it out. use the remote entry to close the door (close the door catch with a screwdriver) listen for the relays to click. working it manually you will hear one set of relays go. with remote you will hear two sets. find that set.

FelixTRX Community Regular

FelixTRX

Posted
Posted

Where are these relays? I'm having similar issues with my aftermarket alarm only working pass front and both rears, and tailgate, but not drivers front door. I want the alarm to do all doors so I can swap over to a slim normal key, not the bulky factory key.

Cheers, Greg.

QWK32 Veteran

QWK32

Posted
  • Author
Posted
Where are these relays? I'm having similar issues with my aftermarket alarm only working pass front and both rears, and tailgate, but not drivers front door. I want the alarm to do all doors so I can swap over to a slim normal key, not the bulky factory key.

Cheers, Greg.

pm sent

hectic180 Contributor

hectic180

Posted
Posted

Hi Ladies/gents,

I have been installing alarms in Sydney for 8 years,

Central locking relays/wires are located behind the glove box.

Remove the glove box and on the left behind the dash you will find a blak box with a plug. I cant remember off the top of my head what the colours were.

This is where i get the lock/ unock pulse for my S2. This will work for 4 doors plus rear hatch.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...