Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
Hey..

How much for the Grille and thermo fan?? Thats if you still have them...

Im in Vic 3805

Cheers

I still have both

$30 for the grille

$50 for the thermo (blade pulled off the motor still works just needs a new nut)

And id say roughly $30-$40 freight as there quite big.

  • 2 weeks later...
Do you happen to have the factory leather auto shift knob, if so how much delivered to brisbane?

i will have a look thru the pile and get back to ya.

  • 3 weeks later...

Bump

Will swap everything thats left (adds up to $2200ish) for a set of R34 GTR rims or something wide and nice offset, sick of the stock autech rims (which can be included in the swap).

Or someone just buy the lot and i'll do a deal, old man wants it gone from his shed, the "few months" i said it would take to get rid of it has been and gone.

still got the 02 sensor

i have a heap of 02 sensors, i am unsure if they work or not so not to keen on selling them on, best to get a new one, i think the EL falcons ones where the same just had to put ur plug on it, around the $70 mark?

  • 5 months later...

Hi mate, any chance you might still have the LHS mirror and black mounting arm (mainly after the black mounting arm)? Getting desperate to find one. Live in Brissy and happy to pay freight. Cheers.

Hi mate, any chance you might still have the LHS mirror and black mounting arm (mainly after the black mounting arm)? Getting desperate to find one. Live in Brissy and happy to pay freight. Cheers.

All good, found one locally :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...