Jump to content
SAU Community

Recommended Posts

Prices are neg.

here are 4x r33 rims with brand new nexen 16/225/50 rubber. $550 the rims themselves have oxidized streaks in the clear coat. probably from brake fluid from previous owner. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3288.jpg

DSCF3291.jpg

here are 4 mazda eunos rims, no tyres, with the 114 pcd 5stud pattern. they fit the rear but will need spacers to fit the front. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3292.jpg

here are 3x 17 235s rubber only 1 is federal 595ss the others are falken 326's. pick up. but can deliver in sydney for $25.

DSCF3290.jpg

here is a stock r33 gtst exhaust system. minus the dump pipe. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3274.jpg

here is a gutted stock cat pipe. more flow :($10 pick up. or buyer pays post.

DSCF3264.jpg

here are stock r33 gtst front and rear sway bars with rubbers. $80 for both or $50 ea. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3266.jpg

here is a series 1 front bar for an r33 gtst. $70 pick up. can deliver in sydney for $25.

DSCF3275.jpg

here is a LHS fender it needs to be resprayed and pannel beated slightly for the dint and the headlight surround. it would do for a drift car though. the damage is minor. see pics. pick up only.

DSCF3268.jpg

DSCF3271.jpg

DSCF3270.jpg

here is a left over sheet of aluminum mesh.the largest part measures 59cm L x 27.5cm W. the but overall it is 121cm L. pick up only.

DSCF3267.jpg

here is a left over 4.10m roll of exhaust wrap. $25 pp

DSCF3283.jpg

here we have 2x universal racing harness's (one red and the other black). with all of the hardware to fit them. i will separate these. $60ea or $100 for the 2. pick up or buyer pays postage.

selling.jpg

here we have an r33 gtst s1 manual computer . $100 pick up. or interstate postage (buyer to pay). but can deliver in sydney for $25.

selling2.jpg

here we have a walbro 341-gss 255lph (with all the mounting gear plugs etc). it has the same internals and ratings as the 342-gss. the only difference being the outlet. the 341 has the outlet on the other side of the inlet. where as the 342 has it straight in line with the inlet. it will not make a difference whatsoever. $120 pick up. or interstate postage (buyer to pay).

selling4.jpg

here we have a r33 gtst used sard top intake sports induction kit with bolts to mount it. $50 pick up. or interstate postage (buyer to pay).

selling5.jpg

here we have 2x r33 gtst whiteline subframe split pineapples. these are split so they can be fitted to the upper part of the subframe bush. used to set the car at neutral stance when used with 2 other pineapples. $15 pick up. or interstate postage (buyer to pay).

selling8.jpg

here we have an r33 gtst stock gear knob and a 2.5" x 3" silicone/rubber intercooler pipe join. $15 for the join. $15 for the knob. pick up. or interstate postage (buyer to pay).

selling9.jpg

Craig.

04396961454

[email protected]

Edited by Trust33

here are the rest.

here are 2x r33 gtst stock mspec side skirts condition ok. and 1 LHS 400r nismo side skirt in primer still needs prep work. $80 for the mspec's and $40 for the 400r. pick up. or can deliver in sydney for $25.

DSCF2790.jpg

here is an r33 gtst stock radiator perfect condition. needs to be cleaned and flushed by a pro shop. $40 pick up. or interstate postage (buyer to pay).

DSCF3314.jpg

here are 2x front r33 gtst HKS hyper D adj height and damper coilovers 1 is fine the other is shagged. the pillow ball shaft has come apart from the main shaft. it made a knocking sounds before i took them out. will need a rebuild. there is a place in QLD that does these and a place in VIC as well. $60 for both. pick up. or interstate postage (buyer to pay).

DSCF3312.jpg

DSCF3313.jpg

here is a holden commodore VT washer bottle pump and a one way valve to stop leaks when the pump s not in use. for a DIY intercooler spray kit. $30 delivered.

DSCF3315.jpg

Craig.

04396961454

[email protected]

Edited by Trust33

$125 pick up or $150 delivered (by me) in syd.

there is another guy interested in it as well. i will give it to him if he still wants it. will msg him about it. if not u r next on the list.

no on the other things u asked about.

Edited by Trust33

wat are the chances we could meetup? i wont be able to make it to ingleburn for a while. ...u go city or anything? can always jus drop by or meet u somewhere wherever u are for that wrap, shoot over a PM

wat are the chances we could meetup? i wont be able to make it to ingleburn for a while. ...u go city or anything? can always jus drop by or meet u somewhere wherever u are for that wrap, shoot over a PM

i work at villawood. though i do go places from time to time. other than that there is the post. where are u located? and where are your usual haunts?

throw me a pm!

Edited by Trust33

err...u got an extra digit in ur phone number :S yea villawood would be awesome cos i drive thru there every arvo. i live in liverpool cbd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
×
×
  • Create New...