Jump to content
SAU Community

Rb25 In R32 Using Rb20gbox Can I Use Rb20 Fly Wheel And Clutch

ahh30two
 Share

Recommended Posts

ahh30two Collaborator

ahh30two

Posted
Posted

hey guys im putting a rb25det into my 32..im using my rb20 gearbox my question is can i use my r32 fly wheel and clutch?

is there a difference in fly wheels between 33 and 32 cheers.any help appreciated as im putting together tomoro .

Link to comment
Share on other sites
2LV8ETR Mentor

2LV8ETR

Posted
Posted
hey guys im putting a rb25det into my 32..im using my rb20 gearbox my question is can i use my r32 fly wheel and clutch?

is there a difference in fly wheels between 33 and 32 cheers.any help appreciated as im putting together tomoro .

Nope. Got an R33 nismo lightened flywheel on my RB20. They are the same.

Same deal with the clutch.

Later man!

Link to comment
Share on other sites
ahh30two Collaborator

ahh30two

Posted
  • Author
Posted
Nope. Got an R33 nismo lightened flywheel on my RB20. They are the same.

Same deal with the clutch.

Later man!

thanks man looks like il use my r32 fly wheel and clutch....

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Compatible rear drive shafts R34 N/A?

      By GTSBoy · Posted

      They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Hello, I am looking to replace my two rear drive shafts in my R34 N/A Skyline but I'm finding conflicting information. Do S13/S14/S15 or R32 NA/ R33 NA fit? https://justjap.com/products/gsp-premium-rear-drive-shaft-l-h-nissan-silvia-s13-s14-s15-3x2-type?currency=AUD&srsltid=AfmBOoqY7EwDaYCUoUU3mxxZ_qrUXkVVHiV4MIN7ozoar6scjnEiekv- would this fit?
×
×
  • Create New...