Jump to content
SAU Community

Recommended Posts

My 32 makes 250kw atw and im running a rb20 box, second gear synchro is rooted and the box whines like an annoying girlfriend in the 1st 3 gears, it is driven everyday with a 5 puck sprung center clutch.

At least it will give you a bit of an idea what to expect, i have a spare 20 box here but ill be fitting up the 25 box very soon

would a rb20 box be able to handle 230kw all day everyday??

street driving maybe with a soft clutch??

I killed one with 183rwkw RB20 and one with 183rwkw RB30 (2nd one went a lot faster with the RB30).

Could have been the button clutch and too many 2nd gear clutch drops though.. :bunny:

Gee he must be gentle with it!

A mate managed to smash one in a HR 31 with a NICS RB20 with a R34 Turbo and Mines ECU! This wasn't from excessive thrashing either! :S

Mate 2 managed to smash one in a HR 31 Passage with a silvertop and GT2530 (don't know power figures for either, but not the best track record lol).

I'd be kinda wary of them myself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...