Jump to content
SAU Community

In Car Dvd Player & Dash Clock Not Working..

brentos

By brentos,
in Car Audio & Electrical

 Share

Recommended Posts

brentos Community Regular

brentos

Posted
Posted

I just installed an after market boost gauge today in my 96' R33 GTS-T.

I sourced the power for the gauge from the the power wires that lead to the in-dash clock, so it is daisy chained which probably wasn't the best way to do it but was easy and seemed like a good power source that was close to where i wanted to mount the gauge.

After wiring everything up the boost gauge works fine, but the in-dash clock and JVC DVD player will not power up.

I have checked all the connectors at the back of the dash and they are all in correctly as are the cables at the back of the headunit.

The fuse in the headunit is fine and all the fuses in the fuse box under the steering wheel are in working order.

I can sort of see why the clock stopped working as there might not be enough power source for the two items or something may have shorted - but I am stumped at why the headunit doesn't work when I didn't touch it at all.

Any advise would be appreciated.

GTS4 32 Enthusiast

GTS4 32

Posted
Posted
I just installed an after market boost gauge today in my 96' R33 GTS-T.

I sourced the power for the gauge from the the power wires that lead to the in-dash clock, so it is daisy chained which probably wasn't the best way to do it but was easy and seemed like a good power source that was close to where i wanted to mount the gauge.

After wiring everything up the boost gauge works fine, but the in-dash clock and JVC DVD player will not power up.

I have checked all the connectors at the back of the dash and they are all in correctly as are the cables at the back of the headunit.

The fuse in the headunit is fine and all the fuses in the fuse box under the steering wheel are in working order.

I can sort of see why the clock stopped working as there might not be enough power source for the two items or something may have shorted - but I am stumped at why the headunit doesn't work when I didn't touch it at all.

Any advise would be appreciated.

hey matey have you checked the fuses in the engine bay proble blew one there some times the clock is fused with your deck at the engine bay fuses

Bill

brentos Community Regular

brentos

Posted
  • Author
Posted
hey matey have you checked the fuses in the engine bay proble blew one there some times the clock is fused with your deck at the engine bay fuses

Bill

Hi Bill, thanks for your assistance mate. I had a quick look before work (didn't have much time, was a bit rushed) at the fuse box in the engine bay and the 10 & 15 amp fuses seem fine (there was about 5 of them from memory). There are the bigger fuses under there I will check those out later. Do you know if it is one of the smaller fuses or the larger square fuses?

Cheers,

Brent.

SLY-25T Mentor

SLY-25T

Posted
Posted

my story has some relevance which may help.

when i installed a small neon to light up a lil sign in my car, i hooked it up to my head unit(pioneer DVD player) wiring. either the neon or head unit would work, not both. i put this down to too much power being robbed from that specific source. also when the fuse blows for head unit, the clock goes off aswell so they must run on the same source.

i wired my boost gauge up to the cigarette lighter light and it works fine. try this and let us know how it goes

brentos Community Regular

brentos

Posted
  • Author
Posted
my story has some relevance which may help.

when i installed a small neon to light up a lil sign in my car, i hooked it up to my head unit(pioneer DVD player) wiring. either the neon or head unit would work, not both. i put this down to too much power being robbed from that specific source. also when the fuse blows for head unit, the clock goes off aswell so they must run on the same source.

i wired my boost gauge up to the cigarette lighter light and it works fine. try this and let us know how it goes

Thanks SLY-25T for that advise i will try it when i get home from work.

Do you know roughly where the fuse is that blows?

I am certain i checked most if not all of the fuses under steering wheel but i might have missed one.

Cheers,

Brent.

SLY-25T Mentor

SLY-25T

Posted
Posted

when the music or light would go out it wasnt blowing a fuse. just the power shifting between the two. but when the fuse did blow it was in the fuse box to the right of steering column. even if it looks ok just try changing it anyway.

brentos Community Regular

brentos

Posted
  • Author
Posted
when the music or light would go out it wasnt blowing a fuse. just the power shifting between the two. but when the fuse did blow it was in the fuse box to the right of steering column. even if it looks ok just try changing it anyway.

I wired the clock back how it was (removed the daisy chain) & the H/U and clock still failed to work.

I then wired up the boost gauge to the cigarette lighter - both the ciggy lighter and boost gauge work fine.

There was a fuse labelled 'audio' in the boot near the battery and i checked that and it is fine.

Now that I have put everything back how it was and it still fails it indicates to me that its a 99% chance that it is a fuse somewhere.

I did double check all the fuses under the steering wheel and they seemed fine but I will take your advise tonight and change them - i didnt get a chance yesterday.

On this list there is a fuse labelled audio http://paulr33.skylinesaustralia.com/diagr...33-fusebox.html - would that be the only fuse that i should replace even though it looks fine because that fuse doesnt sound like it is inter-connected with the clock?

Cheers,

Brent

  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Looney_Head
      Shoota's R33 GT-R RB30/26

      By Looney_Head · Posted

      have you rotated the car yet? if so how smooth was it?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      And finally, I had the driver's side airbox off while adding a long drain hose under the oil can to down near the oil filter. Doesn't look good, it has definitely had an turbo oil seal leak and looks like it has been for a long time.....guess I'll have to get a pair of highflows to put on the shelf It's also worth mentioning it has a really strange clamp between the bottom of the airflow meter (which has a big barb/lip on it) and the intake pipe. I've used the magic of MSPaint to show, basically you have to clip out those 2 steel springs which unlocks the hose from the AFM. I used 2 flat screwdrivers, the spring sort of clips into the unlocked position. Reassembly you just pop them both back flat once the hose is far enough up the AFM that the spring clamp is above the barb. Weird to use but much more convenient once your'e used to it compared to trying to do up a hose clamp under the airbox like on 32 GTR
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      The other thing I started was a fire extinguisher bracket.  As with a few other cars previously (350z, Leaf), I'm going to add a bracket between the navigator seat's front bolts, then mount the extinguisher on that. Unfortunately Nissan (probably the same engineer who did the A/T fluid interwarmer) decided that the front seat brackets would be recessed and uneven so the bracket shape was a bit tricky; I ended up doing 1 part under each seat mount (the large hole is because there is a flange under the seat mount to allow for the carpet thickness)   and then a horizontal part between those 2 No final pic yet as the paint needs to dry, I'll post up once that's done  
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, a few half jobs on the skyline this weekend because its booked for a test day at Wakefield Park on 27-Feb. While the Ecutek dongle and app provide display and logging of a heap of engine parameters, they annoyingly don't have access to the auto trans temp. So I grabbed an oil temp gauge from Raceworks which apparently has warning colour change and peak hold, about $95  and their 8mm hose sender adapter Now, I foolishly thought these 2 might work together, but no, the sender needs about 30mm clearance in the fitting and the adapter only had about 8mm. I've cobbled something together with an NPT T piece and blank for now but will try and work out something more permanent as I intend to use the same fitting for the data logger in the future. Under the car, Nissan's engineers decided that only one opportunity for coolant and trans fluid to mix (the radiator) was not enough, and they also added an interwarmer near the sump on the passenger side like the engine oil has: I've cut the hose between the auto trans outlet and the interwarmer inlet and inserted the sender there as that gives the best indication of temp inside the transmission.   From there it is back to the pain of running that sender wire to the cabin, I've run it up near the passenger headlight, into the battery box, across the channel at the back and into the master cylinder area where I ran out of wire length (and patience). Remainder of the job is through the grommet near the accelerator pedal that I've used previously, then across under the dash to where I will temporarily mount it on the console for track days (and remove it other times). The gauge will also need IGN, BAT and earth (I'm not going to worry about illumination as I'll unhook it between track days)  
    • joshuaho96
      BCNR33/ECR33 Door corner piece replacement

      By joshuaho96 · Posted

      This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
×
×
  • Create New...