Jump to content
SAU Community

Recommended Posts

Hey people just having a clean out of everything iv gathered over the years:

Ive bought a fair bit of this stuff recently in hopes of building a track car but i just dont have the time or money anymore:

-RB20 MOTOR WITH EXTREME (1100KG OR 1200?) 6 PUK CLUTCH (has just had new timing belt, water pump, sump gasket, oil pump gasket, front and rear crank seals, spark plugs. All big end and main bearings inspected and look as new) - $1200

Bought motor off a mate 5 months ago, he got it from D1 from a front cut with 60,000 on it. He used it for a year so motor has done 80-90,000kms.

The clutch he put on it cost him around $800-900

the motor comes with the standard turbo, upgraded AFM, wiring loom but is missing coilpacks, ECU and a couple of sensors.

-R32 COMPLETE REAR END (includes cradle, diff, axles, hubs, brakes, hicas rack & rods) - $550

-R32 ENGINE CROSSMEMBER - $130

-R32 FRONT HUBS (NO BRAKES) - $100 SOLD

-R32 STEERING BOX, RACK AND TIE RODS - $200

-R32 UPPER CONTROL ARMS - $70 PAIR

-R32 SWAY BAR - $60

-STANDARD SUSPENSION (FRONT) - $50 PAIR (X2)

-POWER STEERING PUMP - $30ea (X2)

-HICAS LOCK BAR - $100 (paid 150 for it new and it was used for 1 track day)

-FRONT STRUT BRACE (nismo) - $100

-ALTENATOR - $30 SOLD

-R32 CLUTCH SLAVE CYLINDER - $50

-STARTER MOTOR - $30 SOLD

-STANDARD BLACK FRONT BAR - $30

-FIBERGLASS GTR FRONT BAR IN GREY PRIMER - HAS SOME DAMAGE, MINOR REPAIRS NEEDED - $100 (paid 400 for it new)

-LHS TAIL LIGHT AND SURROUND - $20 (some plastic clips snapped off - super glue job)

-16" 5 STUD SPEEDY LONGCHAMP WHEELS - $300 (NO TYRES)

if you want any pics let me know.

my number is 0433 570 412

located in adelaide

cheers.

Doug.

post-26585-1235975014_thumb.jpg

post-26585-1235975027_thumb.jpg

post-26585-1235975055_thumb.jpg

post-26585-1235975068_thumb.jpg

keen as on the wheels and gtr front far, how much shipped to melb ?

does it come with a reo bar ?

and would you have a right hand side headlight ?

Edited by hirsty
  • 2 weeks later...

PRICE DROP ON MOTOR - $1000 (i am losing money on this motor and i just want it gone)

Diff is sold, all other rear end parts still for sale:

-R32 REAR HUBS AND BRAKES (calipers, rotors, pads (80%), brake lines, h/brake cable - $250

-R32 REAR CRADLE - $100

-5 BOLT HALF SHAFTS - $90

-R32 REAR SWAY BAR - $50

-R32 HICAS RACK AND RODS - $30

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...