Jump to content
SAU Community

Recommended Posts

hey got picked for a "random" drug test/alco test, and to make a long story short got defected, my exaust is to loud didnt evan messure it iwht a db metre, its a standard r33 series 1 exsaust then from cat 3" back to a 5" cannon,it had a silencer in the tip but i had it bashed out, and he looked under my bonnet and sdaid my fan shroud is to small and is ilegal, what do i do? try and pass it with a silencer, also i have a trust turbotimer, a greddy boost controller and a blitz infomation display all in the secon din pocket, are any of these ilegal?

Link to comment
https://www.sau.com.au/forums/topic/259276-defected-need-advice/
Share on other sites

set your turbo timer to 0 then they wont hassle you for that

pretty much make sure all your signals are working (breaks, indicators, lights, revers and number plate lights)

also make sure your wipers and squirters work

make sure that your tyres are good

it has to be over 11 cms from the ground at the lowest point (usually exhaust)

your exhaust will be fine, mine has no mufflers (only a cannon) and it passed last week with a bashed out cat :blink:

it has to be over 11 cms from the ground at the lowest point (usually exhaust)

100mm in WA. And it's only for solid items like the exhaust. Flexible items like mudflaps etc. are ok.

This pissed me off when I got done becuase the inspector told me of a recent Merc that was brought out from the factory and passed that had an 85mm clearance.

Typical..........

100mm in WA. And it's only for solid items like the exhaust. Flexible items like mudflaps etc. are ok.

This pissed me off when I got done becuase the inspector told me of a recent Merc that was brought out from the factory and passed that had an 85mm clearance.

Typical..........

500mm to bottom of the headlight , had a 32 pass that wasnt 100mm under car clearance

500mm to bottom of the headlight , had a 32 pass that wasnt 100mm under car clearance

That's probably another of their little tests. When I went over, there was a 100mm bump and the inspector said that if I scraped, I was too low.

He didn't measure to the headlights, he measured the eyebrow level and told me I had to put a 10mm block under the rear spring?!?!?!?!?!

What they'll pass you for depends on whether they got a root the night before.........

^ here here

when i was at the pits i was told it is 100mm for the lowest part of the car (does NOT have to be solid - ie. my bodykit was measured as it was lower than my exhaust)

WITH a car load of grown adults AND a full tank of fuel

that's my personal understanding, i got let off as i had adjustable suspension because they check that too, let off with a warning to get a permit for the suspension asap so if you have adjustable suspension that may work in your favour

Edited by hoony
100mm with a full car load as well.

My car was 100mm exactly with nobody in it, inspector passed me with a warning on that one!

HAHA... bloody inspector failed me even with 100mm. He says if there was 5 ppl in the car it will be less than 100mm. That was his reason for failing me. OH stock car! So good luck!

^^ Rock hard billsteins here mate :) Passed fine (5 ppl would probably drop it half a cm max.. lol)

The problem is its a STOCK CAR! If it was lowered or modified in anyway i would understand. Told him thats the build of the car, its lower than most car even with stock springs and suspension.

100mm in WA. And it's only for solid items like the exhaust. Flexible items like mudflaps etc. are ok.

This pissed me off when I got done becuase the inspector told me of a recent Merc that was brought out from the factory and passed that had an 85mm clearance.

Typical..........

the A series merc had a 85mm clearance where the oil sump was the lowest part of the car. This had a manufacturer warranty with it meaning that if anything happened to the oil sump, merc will have to fix it or give you a new one.

I was told it was a 100mm clearance from the lowest part of the car excluding mud flaps.

Do the simple things:

Degrease engine bay and gearbox.

Make sure car is as said 100mm of ground everywhere.

Headlights are 500mm of ground.

Put in silencer to exhaust.

Depending on which PITS you got they have different ways of test height. They usually drive over a speed bump. If it scrapes, too low. Pits have different height ones. Heard welshpool is 85mm and another one is 140mm

Fan shroud is just a way of getting you stickered cos u wouldn't know the regulations about it. Similar to tyres. How do you disprove that they weren't bald when the cop issued sticker. So have good tire depth. Gadgets aren't illegal as long as they are not inpairing vision of drive.

But yeh, stickers are a cops way of making it harder for you as a car enthusiast. And to scare people.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
  • Create New...