Jump to content
SAU Community

Ticking Noise From Drivers Side Door..


Recommended Posts

Okay.. it was ticking in my gts-t r33.. and since it was at night. i had my headlights on, while it was ticking (i had to put my ear on the door to hear it)

the lights loss a bit of power.. so it was like.. high power/low power ticking..

anyone know what it is o_O"

Link to comment
Share on other sites

Okay.. it was ticking in my gts-t r33.. and since it was at night. i had my headlights on, while it was ticking (i had to put my ear on the door to hear it)

the lights loss a bit of power.. so it was like.. high power/low power ticking..

anyone know what it is o_O"

so what your saying is....when it ticks... it seems like its drawing power, affecting the luminosity of your headlights?

does your electic windows work? & if you have the automatic door lock...does that work properly?

sounds strange, the only thing that draws a bit of power through your doors is the electric window motor...but still...it shouldnt drain that much power to the extent of noticable lighting difference?

Link to comment
Share on other sites

its very small eiko.. i think its my power windows, because i have to press up on my drivers side like 10 times before it works.. :| any idea what the problem is

yep... in that case, sounds like your motors, f**ked!........... but a slim chance it can still be your switch.....

ok......what you need to do to confirm this.......

is to get say a 12 Volt battery............

hook 2 wires coming from each of the (+) & (-) terminals.........

you will need to open up your trim....... where the motors wire connects should be a plastic connection latch that connects to the harness from the engine bay....

pull the connection open........ it will show either a male or female side plug......there will be 2 wires inside the plug....

test it by putting (+) on one side and (-) on the other......

this will either make your window go UP.......... or DOWN.......

then swap the wires around......... this will make it do the opposite to the previous.......

(so there is no positive or negative on the terminals for the motor.....)

if that works the motor....then ur switch is f**ked......

simple as that.

and if that doesnt do it at all........then your power window motor is definately stuffed!

cause what your doing is...... bypassing the battery supply straight to the motor.......avoiding the switch....

let us know how you go. or ask if you got any more questions

Edited by eeiko321
Link to comment
Share on other sites

How many noises/issues you have with this car??

Maybe consolidate them into one thread instead of starting like 4.

true

but this way i find is more efficient.......

you put it in 1 big thread........

every tom dick and harry with give thier 2 cents to the easy ones.....as usual...you'll have 20 replies but none of them would cover all of them....

..and leave out the hard ones or real technical ones...

this way your more likely to get all your questions.........answered.......

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...