Jump to content
SAU Community

Recommended Posts

Hey all

I have few parts for RB25DET

All items are in Adelaide

Pictures can be arranged if needed?

All items are in new or near new condition and work perfect !

ITEM : Trust TD05 20g turbo

INFO : Little bigger then standard series 2 turbo but has steel wheels and produces alot more torque ! On my gtst it made over 200 RWKW with a huge 600NM torque at 1 bar boost !!! Turbo is in great condition have only done 12XXXkm with it !

PRICE : Looking for $1000 including lines and dump pipe.

ITEM : Full set of HKS 600cc injectors for rb25det,

INFO : These are in great condtion , bought them with the above turbo at same time.

PRICE : Chasing $680

ITEM : Genuine Trust oil cooler and oil relocation kit .

INFO : Dropped oil temp by 15deg in my GTST !! Very good condition, comes with brackets, braided oil lines and so on. PRICE : Chasing $650

ITEM : Apexi Power fc,

INFO : Tuned with the above parts and front mount and zorst.

PRICE : Chasing $1000

ITEM : HKS exhaust cam gear

INFO : Brand new

PRICE : Chasing $200 - cost me $250 less then 2 weeks ago.

Or will do complete package for $3200 Including all the above parts.

PM me For any questions.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/259411-rb25det-performance-parts/
Share on other sites

where were you 2 months ago wen i was chasing down EVERYTHING you had for sale...omg........FFARRRRKKKKKK ..woops sorry lol on a side note u got the hand control for pfc? got a graph of the tune with AFR's?

Hey all

Power FC - SOLD

Trust oil cooler and relocation kit - SOLD

Injectors - SOLD

Trust TD05 - SOLD

HKS adjustable exhaust cam to suit RB motors - Still for sale $200 ( brand new never used )

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...