Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

What wheels are the ones on the supra? they dont look cheap, i like them tho.

these must be like 10k lol does anyone kno if theres anything similar to these on the 35?

the others i like had difficult finding the right size. once again madonnas i think only come in 20inch??

and the vsr's were too skinny but i like how they have a black lip with it.

The wheels on the supra are Rays Volk CE28Ns. worth = $$$$$$$$$

but any combo of black spokes and chrome lips will give u a average appeal.

as for the middle pic in your post. they are quite cheap and look awsome. see them on many cars.

http://bigotyres.com.au/showcase/index.php...products_id=270

julz go for gtr rims or

te37 black with red lips (time attack i think)

http://www.mynismo.com/products/?id=4706

the only problem with that is they have been discontinued for i think about a year now and any left overs would cost $4500+

Yes you are right.

I spoke to GTTR34 lastnight and thats what he said, Air Lifts, so when the car goes into the pits to do a tyre change, the car can just quickly jack itself up.

Save the pit crew from lining up a jack / lift under the car and straight to the tyre change.

they look good actually, well integrated into the bodywork.

we have a winner! will need to save a bit more money tho. Anyone know where i can buy or order volk ce28n in wa?

cheers thanks a lot everyone!

The wheels in that pic are Advans.....

If it is ce28's you want then perfectrun are great to deal with (but expect to pay 4k new), otherwise I'm pretty sure jpc have a few sets of 17's.

The wheels on the supra are Rays Volk CE28Ns. worth = $$$$$$$$$

but any combo of black spokes and chrome lips will give u a average appeal.

as for the middle pic in your post. they are quite cheap and look awsome. see them on many cars.

http://bigotyres.com.au/showcase/index.php...products_id=270

the only problem with that is they have been discontinued for i think about a year now and any left overs would cost $4500+

Wheels on the black supra are GTN, not ce28.

The wheels in that pic are Advans.....

If it is ce28's you want then perfectrun are great to deal with (but expect to pay 4k new), otherwise I'm pretty sure jpc have a few sets of 17's.

hmmm seems as tho ur right.. in the pic it looks like there advan rs wheels very similar to ce28n's tho. looks like the advans are a goer, im guessing cheaper than volk also..

Edited by 1R34SON
  • 5 months later...

I kinda wish I bought these rims for my Black R34...

greente.jpg

Takata Green Volk TE37's

However I have ordered these and will post pictures once they arrive...

ssr_typef_b_ci3_l.jpg

Matte Black SSR Type-F's

  • 9 months later...

you really need to figure out your budget.

youll need $3500+ for decent offset JDM wheels. sometimes you can have it for less but the majority is around that bracket. if you start looking for 19s or even 20s in big offset JDM will be extra expensive.

personally it sounds like you haven't got much to spend and dont feel bad because the majority of people dont.

check these guys out. they have a great range of black spoke wheels which i personally think look the best on a black car.

enjoy and gl.

http://www.stgeorgetyres.com.au/coloured.htm

p.s - i have a set of 19" Volk GTCs which would fit perfectly on a R34 GTT, but like i said they come at a cost. check my sig for details

Startin to really like these tho rush haha

http://farm4.static.flickr.com/3079/240115...120d067aa_o.jpg

"i think these are volk ce28's in 18's"

can anyone confirm if this is what there really called?

Replying to an old post, but they are either Advan RS or RZ. RZ have 4 sets of 2 spokes, RS are evenly spread. they are NOT CE28N (unless someone has changed the link to the pic)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...