Jump to content
SAU Community

Recommended Posts

Had a mate looking at my car (r33gtr)cause he's never seen it before and he noticed i had a HKS cooler on it.

i knew it wasnt a stock item but yea... HKS!! we measured it and its about 100mm thick.

Now the question is will the HKS cooler out perform the stock gtr intercooler power wise? basically will i get more from my mods with this cooler than stock?

initially i am looking for a power goal of approx 280 rwk on about 16psi. will i get more power on the same boost or not with this fmic? lag? what are your thoughts.

here are my mods for anyone who asks:

-7's @16psi

wolf ecu

full exhaust

540cc injectors

nismo f/pump

apexi pods.

*injectors and wolf aren't in yet but will be soon. car currently on 12 psi*

thanks :P

Edited by R33GOD
Now the question is will the HKS cooler out perform the stock gtr intercooler power wise? basically will i get more from my mods with this cooler than stock?

The bigger and better HKS FMIC will allow you to run a higher boost than a stock IC.

The more boost, the more heat. The bigger the IC, the better the cooling.

A stock R33 GTR is good for abour 300kW's.

I read an artical in a ZOOM mag (I think) afew years back and they did a test for the standard GTR intercooler VS an aftermarket one VS a TRUST Triple core intercooler.

Some time bigger is not always the better but as what 2LV8ETRsaid... You have that option other wise there is no point in having a bigger intercooler.

The bigger and better HKS FMIC will allow you to run a higher boost than a stock IC.

The more boost, the more heat. The bigger the IC, the better the cooling.

you can have a big cooler and it perform shit compared to a smaller one

its about the internal design, fins and so on.

Bigger doesn't not equal better necessarily.

If you saw the size of the coolers Nizpro use on the XR6 turbos for 400rwkw you wouldn't believe it - i didn't. :P

I have 330ish rwkw on a stocker no probs. I think your limiting factor will be the 540cc injectors, at my power I am hitting 90 percent duty cycle at close to redline with 700cc.

Someone may correct me but I would sell yours and get bigger ones so you always have some safety net, you don't want to be running 100 duty cycle

stock 440's with a FPR and a minor increase flow 300rwkw. Ferni has done it before.

I see 90% duty @ 280rwkw/15psi on factory injectors at the moment as a max.

550's flow enough for 340-360rwkw without a drama at all. I've got a set sitting here waiting to go into mine.

700's should be good for near on 400rwkw from memory if not more

If your @ 90% with 700's I think you have a fuel pump on the way out, or perhaps a slight blockage somewhere/bent lines etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok, can confirm.  if you use it like a normal human being in the real world, it works fine.  it only starts crossing wires if I keep using the fob over and over again in a very short period. So if I just chill the f**k out, it works 😂😂  
    • Im about to run a e30 mix of e85 and 98ron but i read that australian fuels specifically 98ron doesnt contain ethanol so on the calculator when it says pump ethanol percentage do i just put 0 or is this statement even true? And if it is true i assume i dont need to test any 98ron pumps.
    • So... the fob I had for my Skyline always had this issue where the "Unlock" button worked with no issues but the "Lock" button did nothing (and I always had to lock with the key) I thought I'd try resetting and pairing the key to the car today to see if that fixes the issue. I did the standard steps to program a key but realised my central locking was doing its own thing from time to time. 1st time: The driver-side doors would not lock or unlock when using the fob. No issues with the key. I figured it was the right time to change the battery in the fob so decided to go get one. When I went to the shop all doors locked and unlocked with the fob (while it had the old battery 🙃)   2nd time: When I locked the car, it would lock itself and immediately unlock. If I unlocked it, it would unlock and immediately lock.   3rd time:  After a bit of cursing and praying, that weird bug stopped. But then the rear passenger door started being a pain. It wouldn't really follow what the fob was asking it to do. Sometimes even using the key would not do what I wanted. So I'd lock the car with the key and all doors would lock, but the rear passenger lock didn't do anything at all. And then after a few moments, it would work again.   Is there a fuse that I should be looking at? or, is this one of those things where the door card needs to come off and some unit needs to be replaced? It just seems to happen from time to time and if I give her some space and come back later, there are no issues  🤦‍♂️ Also, should I try to program the fob again to the car just to see if that solves it?
    • One would assume a turbo is somewhere in its future down the line given they slap turbos on pretty much everything that arrives   
    • I’m guess it’ll end up with a turbo 
×
×
  • Create New...