Jump to content
SAU Community

Recommended Posts

The next thing you know, you'll be parked on the side of the road with a 500m long oil slick in your wake, with parts of the engine scattered all over the place because he thought you could advance your timing 40 degrees with 35 lbs of boost on regular unleaded whilst using the quality stock injectors.

Exactly. Everybody knows if you're going to do that you should run premium at least!

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

Exactly what I have so agree.....having said that mine is showing some surface rust in a few exposed areas(at the bottom) was installed 08/2007

I would get a better cat though

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

Yeah I agree, but I went with stainless anyway.

The mild steel one will start to spot, then turn a disgusting shit brown, and then will start to flake.

The stainless won't.

In the words of Borat - " It's a nice, I like!!!"

how much difference is there with a decat and high-flow? noticeable performance?

also apparently u smell petrol alot more and get black fumes aswell?

Does it change the sound aswell?

You get flames, strange smells, and hurled abuse from Greenpeace with a decat.

Black fumes? You mean black soot and stuff? That's your car running rich. You see it with/without a cat.

you will get a nice tan on ya rear bar that is a bitch to polish out all the time just get a hi flow cat you might lose 1hp lol and the tree huggers will be slightly happy

go with the bellmouth stainless. get a better cat than the just jap ceramic highflow. they have an overpriced xforce metalllic highflow. but any metallic highflow cat will do a good job.

then get a tune

then go see your mechanic, and tell him he's sooo wrong. then do some skids as you leave. then go back and look out your window at him, and say "seeeeeee?"

then come back here and tell us how much better everything feels now that it can breath freely.

then go home and eat some food. it will taste better than ever before.

your girlfriend will look hotter.

your friends will seem less annoying.

then later on, prank call your mechanic.

but seriously, do it. its well worth it. theyre so damn cheap anyway. $200 for jjr stainless front/dump bellmouth?

based on a true story. names and places have been changed. vehicle was an r33.

Edited by Munkyb0y

turbo's hate exhaust back pressure! ANY back pressure is ALL bad.

any removal of bad gas flow from any part of the exhaust will make torque and horsepower.. and proabably ecconomy!

If your paying somebody to do work for you, and they dont go racing... find somebody else who does go racing!

Because they will be 150 000 000 steps ahead of the dude your talking to!

the more they know, the more chance that they will often charge more for work done,

but that will save you $$$ cos they actually know what they are doing and can advise you on the next logical step forward that suits your needs. You wont be buying parts you dont need and then trying to get rid of them to buy something else that 'might' work.

that help you?

So far 9 out of 10 people say fitting a dump pipe will give gains BUT.... i noticed that along with changing the dump,most ppl also changed the cat,front pipe or the complete exhaust at the same time.

I already have a 3" cat-less exhaust from the stock dump pipe back.What kind of gains will i experience if i go with a bell mouth dump? Also all these dump pipes u guys are referring to are 3" right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...