Jump to content
SAU Community

Recommended Posts

The next thing you know, you'll be parked on the side of the road with a 500m long oil slick in your wake, with parts of the engine scattered all over the place because he thought you could advance your timing 40 degrees with 35 lbs of boost on regular unleaded whilst using the quality stock injectors.

Exactly. Everybody knows if you're going to do that you should run premium at least!

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

Exactly what I have so agree.....having said that mine is showing some surface rust in a few exposed areas(at the bottom) was installed 08/2007

I would get a better cat though

I am about to order an X-Force dump/front pipe and hi-flow cat. I've been told they are very good. I wanted stainless but they are double the price and apparently mild steel will last a bloody long time anyway. Agree?

Yeah I agree, but I went with stainless anyway.

The mild steel one will start to spot, then turn a disgusting shit brown, and then will start to flake.

The stainless won't.

In the words of Borat - " It's a nice, I like!!!"

how much difference is there with a decat and high-flow? noticeable performance?

also apparently u smell petrol alot more and get black fumes aswell?

Does it change the sound aswell?

You get flames, strange smells, and hurled abuse from Greenpeace with a decat.

Black fumes? You mean black soot and stuff? That's your car running rich. You see it with/without a cat.

you will get a nice tan on ya rear bar that is a bitch to polish out all the time just get a hi flow cat you might lose 1hp lol and the tree huggers will be slightly happy

go with the bellmouth stainless. get a better cat than the just jap ceramic highflow. they have an overpriced xforce metalllic highflow. but any metallic highflow cat will do a good job.

then get a tune

then go see your mechanic, and tell him he's sooo wrong. then do some skids as you leave. then go back and look out your window at him, and say "seeeeeee?"

then come back here and tell us how much better everything feels now that it can breath freely.

then go home and eat some food. it will taste better than ever before.

your girlfriend will look hotter.

your friends will seem less annoying.

then later on, prank call your mechanic.

but seriously, do it. its well worth it. theyre so damn cheap anyway. $200 for jjr stainless front/dump bellmouth?

based on a true story. names and places have been changed. vehicle was an r33.

Edited by Munkyb0y

turbo's hate exhaust back pressure! ANY back pressure is ALL bad.

any removal of bad gas flow from any part of the exhaust will make torque and horsepower.. and proabably ecconomy!

If your paying somebody to do work for you, and they dont go racing... find somebody else who does go racing!

Because they will be 150 000 000 steps ahead of the dude your talking to!

the more they know, the more chance that they will often charge more for work done,

but that will save you $$$ cos they actually know what they are doing and can advise you on the next logical step forward that suits your needs. You wont be buying parts you dont need and then trying to get rid of them to buy something else that 'might' work.

that help you?

So far 9 out of 10 people say fitting a dump pipe will give gains BUT.... i noticed that along with changing the dump,most ppl also changed the cat,front pipe or the complete exhaust at the same time.

I already have a 3" cat-less exhaust from the stock dump pipe back.What kind of gains will i experience if i go with a bell mouth dump? Also all these dump pipes u guys are referring to are 3" right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've watched some vids and the technique seems to be to butt the sheets up to one another and use MIG to spot weld and slowly fill in the spots until its eventually all sealed. No runs as you would normally do, as there's too much heat generated that way. Yeah my stick welds are terrible these days because its been so long since i've done any of it. I expect to be spending many hours practicing
    • I have personally seen a Tomei USA RB26 cam that didn't even fit the head. Kind of nuts to me that it was even possible for that to happen but such is life.  There's two UP Garages in the US. One is a US branch of the Japanese company which sells things they brought over at tremendous markup. The other is University Place Garage/Fairlady Motors which is a shop best known for putting VCAM in RBs and trying to convince people to stop putting in 800hp of turbo on a 2.5L motor.
    • Gasless MIG is not exactly suited to what I would call "delicate" or "attractive" welding. So I would rule it out for sheet metal rust repair type stuff, unless you're only doing it in hidden places. I'm thinking about getting myself a gasless MIG for "hack together" type work. Noting that my welding experience is very very low, and quite a long time ago. So I'm also looking for "simple", but I'm not expecting "excellent". I'm not even sure that proper MIG is the best for sheet metal work. I get the feeling that the degree of control and the minimisation of heat input that you get from TIG is probably what you really want. And then you have to get good at doing it before the welds won't look like a monkey flinging a handful of shit anyway. You're probably SOL for an easy and cheap way to get from where you are to where you want to be. Much like myself.
    • Any recommendations for what would be the easiest welding type to start on, for sheet metal rust repairs and maybe some exhaust piping too? Seems like MIG is the most common. Would gasless MIG be ok to learn on and do some simple jobs? I have a stick welder which has a Lift TIG setting, but i'm more interested in getting whatever's easiest to do, and most suitable, rather than using what i have.
    • Is the UP Garage in the US of Ayyeee even the real UP Garage?
×
×
  • Create New...