Jump to content
SAU Community

Recommended Posts

Ok... the turbo comes off my car tomorrow night and then gets looked at next week by various places.

I'm thinking, as a rebuild for my t04e could be up near the $1000 mark worst case, and i'll probably look at chasing a lot more power later on.

I may aswell hi-flow it or whatever whilst im at it. Im ultimately going to be after 300rwkw.

I have 203rwkw now on 13psi. The turbo is efficient for probably another, eerr. 4psi or so i think.

As it's a garrett and they like lower boost levels.

So as i could be spending near $1500-$2000 on my t04e...

Is there something better that i can get for around the same price... probably i'd got as far as spending $2500-$2700 at the MOST but i have no idea what

The one critical thing though... is this turbo must bolt up to my GTS-R manifold which my current one does now for my own reasons i want to keep it.

a) Looks good and keeps the stealth look as i've got a nice factory heat shield that covers everything.

B) Works well in the low-mid range

c) Makes my car sound totally different to any other RB25 going around so im nice and unique.

d) I'm cheap and cant afford to have a manifold made up anyways :(

So that probably limits my choices a little...

If anyone has any ideas or suggestions that'll be great so i can go shopping next week with half an idea.

I'm not too keen on 2nd hand goods as i dont really know where they have come form and what not and i cant afford a turbo dying 6-12 months down the track!

Link to comment
https://www.sau.com.au/forums/topic/25986-decisions-decisions/
Share on other sites

  Quote
Originally posted by Roy

Talk to local turbo shop and get them to give you a nice Garret turbo. GT25/30 mix and match or one of the smaller GT30 turbos. Shouldnt miss and fits the $$$.

And flog the T04E off to another RB owner

mmm that;s what im thinking. How much is a t04e worth ?

it's got me buggered... as if i sell it then i'd have much closer to $3000 to play with.

I didnt realise the new BB HKS TO4Z was on the market yet.

The turbo is only worth what someone is willing to pay... but at a guess i think you could safely say youd gett $600 on up for one.

Ive read that some shops have had some success with GT25 turbos having GT30 compressors and 4" compressor housings.

Sounds like you're gonna have probs, chasing too much on too much of a tight budget. hmmm...what about those injectors?

have a look here anyway, should be something to get you started on ideas..

http://www.horsepowerinabox.com/HPIAB2/cat...ategory26_1.htm

If you buy a cheap turbo, thats what you get.

For your budget, I think you may be pushing it a bit, esp as you are looking for around 300rwkw.

You could get a turbo that will make that figure within your budget, but what about response and efficiency?

My recommendation would be something like a GT35R that Per4manz turbos in WA sell. They have had some good results (it has been developed in house) with this turbo on RB25s, and 300rwkw is well within its range. It will bolt on with adaptor plates, but will need an external gate. The turbo itself sells for under 2.5K, a second hand gate probably $4-500. From there it would be possible to fit the gate to the turbine housing, but you will of course need to have a dump made.

Per4manZ actually do a package, fitted for around 5K with tuned lenght manifold. This acutally is really cheap when you add on the added costs of oil and water lines and pipeage to and from the turbo, fitting, gaskets, head studs etc.

Remember too that with 300rwkw, you will probably need to decompress the engine, or do a rebuild with forged internals:)

Other considerations will have to include clutch, fuel pump and injectors, and a new AFM or running from MAP(assuming you already have an aftermarket ecu).

For the sort of money you outlined, realistically, an upgraded turbo wont come near to the sort of power you are chasing.

Something like a HSK 2530 or 2835, second hand if you can pick one up (which you should be able to) for under 2K, with associated change to pipeage and sale of your own turbo, would come close to coming in on budget.

This will give you a noticeable improvement to the stock turbo, but not up around 300rwkw. With a 2530 or 2835, when you go to sell it, you will get most of your money back, if not all. To me a high flow would be somewhat of a waste, as you will get no where near your purchase price back.

Even with a 2530 or 2835, you will still be looking at clutch upgrade (if not already done) and fuel pump, plus an AFM - but these would probably be needed either way. And you will need some tyres with grip:)

Sorry, waffled on a bit:D

Hi R31Nismoid, my suggestion would be a Garret GT25R, good for 48 lbs of air per minute, which is around your 300 rwkw target. It will bolt up to your manifold and most other pipework as well, has an internal wastegate and at around $2,500 is within your budget.

The only problem I see in achieving 300 rwkw is that it is going to require substantial upgrading of a large number of support systems. Almost everything on an RB25DET is past its limit at 250 rwkw. You will be looking at stuff like injectors, fuel pump, camshafts, exhaust manifold, oil capacity, water radiator, fuel pressure regulator, headgasket, BOV, ECU, AFM etc etc.

To take an RB25DET from its standard 120 rwkw to 300 rwkw always costs, in my experience, around $25K, if you do some of the work yourself. Subtract from that what you already have (that is capable of supporting 300 rwkw) and see if it is within your budget.

Hope that helps

  Quote
Originally posted by Steve

Something like a HSK 2530 or 2835, second hand if you can pick one up (which you should be able to) for under 2K, with associated change to pipeage and sale of your own turbo, would come close to coming in on budget.

This will give you a noticeable improvement to the stock turbo, but not up around 300rwkw.  With a 2530 or 2835, when you go to sell it, you will get most of your money back, if not all.  To me a high flow would be somewhat of a waste, as you will get no where near your purchase price back.

Sorry, waffled on a bit:D

No worries about the waffle ! i do it too...

I dunno about 2nd hand goods though, i've seen garrett items (new) for low mid $2000 so that's withing my price range, 2nd hand could have it blowing up in 6-12 months and that realistically is something i really wont be able to spend $$ on again. ??

Or am i not right in assuming that ? A new turbo in theory would last longer ?

an im not going to be selling my car anytime soon so it doesnt bother me about a re-sale value.

i've just had bad luck with 2nd hand stuff that was fine when i got it and just died 6 months later so im skeptical at times.

Maybe i should've also have said that the motor will more than likely get a 3ltr bottom end late this/early next year. Or i might stay 2.5 ltr.

But either way it'll have money spent on it :) so it wont have stock internals.

But so far...

*Fuel system is almost complete. I just need bigger injectors and i'm virtually finished.

*Clutch, done.

*suspension done.

*brakes - half way there at the moment - awaing more funds :( as we all are !

*AFM, no drama's there.

*tyres that'll be ok too.

*various things like oil coolers are also things that will be done once the motor comes out.

It's just soley turbo im talking. The supporting elements are either done or just about done before i got the car so i've saved a great deal of money there, hence why i snapped up the car when i saw it.

Thanks SydneyKid (as always)... i was hoping something would bolt to my manifold that i curretly have, and you know which one im talking about (gts-r ones) so it helps a lot :)

I'll get some pics up later tonight of the whole set-up, including manifold. The turbo comes off tonight i hope.

So that will give you an idea of what i've already got.

And most of the work will be done by people i know so labour is not an issue, just the price of VB's at the time :P

i'll post back up later tonight with pics.

thanks for eveyones help so far. It's helping me get a great idea before i got shopping :D

True what you say about second hand, you can get burnt, but there are some great bargains too.

Make sure you get the turbo checked out properly before buying, the only problem with Garrett turbos is they dont have the resale of a HKS.

The reason I bought HKS second hand turbos up was as a stopgap between getting a turbo suitable for 300rwkw, and now.

For your budget you probably wont get a good turbo capable of supporting 300rwkw, and be responsive enough that you dont end up with a lagmonster.

Good luck anyways

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...