Jump to content
SAU Community

Sr20 Os Gearset In Rb20 Box

robots
 Share

Recommended Posts

Mase Mentor

Mase

Posted
Posted (edited)

Haven't tried it but they're very similar and I wouldn't be surprised if it all fitted fine. Why not just buy a stuffed SR20 box, throw the gear set in and then chuck the rb20 bellhousing onto the sr20 box as they're interchangable.

I just put a SR20 bellhousing onto a CA18 gearbox I had to use in my brother's SR20 180sx.

Edited by Mase
Mase Mentor

Mase

Posted
Posted (edited)
I think the SR box is about 20 mm shorter than the RB20 box. Might want to do a bit more research?

If people can run a RB20 bellhousing onto an SR box I cant see there being a problem. I havent used an RB20 bellhousing on an SR20 box before, just heard of other people doing it. I've been told the CA18, SR20 and RB20 boxes are very similar and bellhousings interchangable.

Edited by Mase
Beer Baron Grand Master

Beer Baron

Posted
Posted

do it brisby. :rolleyes:

in fact justin is out of town for 3 weeks. pop over to my place and we can go down to the basement and whip his box out and swap it with yours. lol, he hardly ever gets to sixth anyway so as long as we leave his gear knob on there he probably wont notice for a while...

Mase Mentor

Mase

Posted
Posted (edited)
So does that mean an S15 box will go behind an RB20?

Couldn't tell you for sure, but if people can put a 5 speed behind there S15 SR20 then I can't see why not? Might need to change the tail shaft? The standard S15 6 speed isn't exactly a very strong box though.

Edited by Mase
Roy Grand Master

Roy

Posted
Posted

Yeh, but i am a tight ass so am pretty kind to mechanicals when i drive my car, so would hope i could get one to hang together. Still trying tpo do some numbers on the OS Giken gear set and also on PPG box, though ongoing maintenance is my main concern with a helical dog box from PPG. LOL i am easy on mechanical parts but hard on panels :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Should I use rust converter on this?

      By PranK · Posted

      Sorry the pictures suck. So hard to get camera and light in there
    • PranK
      Should I use rust converter on this?

      By PranK · Posted

      One of the first jobs with the E39 is making sure the tailgate stays up. In BMW fashion they made a little cavity under the roof to hide the dampers rather than putting them down the side like everybody else.  As you can see I have these little cavities that house the dampers. When I cleared one out and vacuumed as much crap as I could out of it I noticed a fair bit of rust. The cavity is bone dry, even after all that rain we had only a few days ago so I'm assuming that whatever allowed the moisture in is fixed but I'd like to treat the rust in there.  I was thinking of just blasting it full of rust converter but I didn't know if this would be beneficial considering I can't actually get in there to prep anything.  Maybe there's a better product?  Thanks guys
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Had a few skylines over the years anyway bought this a few years ago for skidz i think it’s been around these traps for a while anyway I plan to thrash and trash and I assume it’s going to send me broke good times
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      The stock boost solenoid is just a valve. Power it and it is open. Unpowered, it is closed. When it is closed, there is no boost bleed out through the solenoid back to the inlet. The wastegate sees all the boost pressure, thus you get the wastegate's spring pressure as your boost pressure. 5 psi. When it is open, it lets some boost escape. This causes the static (boost) pressure in the line to the wastegate to be lower than the pressure in the intercooler pipe. There is probably a small restrictor in the solenoid or one of its lines to limit the flow rate of the escaping air, which limits how far the static pressure can fall, which limits the extra boost. The boost has to climb above the original/wastegate setpoint until the wastegate sees 5 psi. You get 7 psi in the intercooler pipework. A manual boost controller is exactly the same setup, just without the ability to change it on-off. It's always set to whatever you set it to. There is a small leak from the boost controller. The more you screw the adjuster in, the more it leaks, the lower the pressure seen at the wastegate and the higher the boost will be. So, yes, your diagrams are correct.
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Hi everyone, Apologies in advance if this feels like a topic covered multiple times. I'm only asking because some of the old topics I found are missing images now. I'm in the process of getting a manual boost controller (BC). Nothing fancy, just getting a manual one for now as I don't plan to go crazy with it and would not go over 10 PSI. My car is not jacked up on boost steroids to do crazy numbers. I want to understand the OEM setup of the boost solenoid and vacuum lines on the R34 GTT so I know what needs to be changed when I do install the BC. I sketched the current setup to the best I could see and it's on the diagram attached. If the boost controller 'Wastegate Arrow' goes from nipple 1 to 2. My understanding is that the red vacuum line's "F" connector-end should be connected to BC nipple #2? Nipple #1 is meant to have the "pressure source" so what vacuum line would that be? Is it the green vacuum line?  From what I have read here, the OEM boost solenoid is not used at this point. So that can come out and then I can just plug the nipple that usually connects to the blue vacuum line?  So would the final setup look something like this?   Thanks in advance. I don't want to already be knee-deep into pulling out vacuum lines before understanding this. I'm a noob when it comes to boost setups so trying to learn as I go.
×
×
  • Create New...