Jump to content
SAU Community

Recommended Posts

i cleaned my garage, now i got some stuff i wanna sell

r32 gtst wheels x4 (black) perfect condition, brand new nangkangs 225/50/16 (only 100k's old) = $550

r32 coilpacks, work fine $25each or the lot for = $110

r32 stock air box, perfect condition = $20

r32 stock brakes, front and rear calipers, and 4 x stock rotors .. (have a bag of all the pins pads ect too, ALL for = $120

r32 fiberglass eyelids, brand new = $25

r32 stock coilpack cover (black) = $10

r32 REAR BAR BN, originally the style was for a 180SX, ADRENALIN modified it to fit an r32 4door! looks nice.. very big CURVY & sexy bar, needs abit of glassing.. just on the rear support tabs, piece of piss to fix! = $80

Fujisubo Giken, jasma approved sports muffler, 3' inlet, 4-5' tip?, stainless, Seriously a nice muffler = $70

short shift kits, 3 x throw shifters, 1stock one, 1 aftermarket noname & 1 nismo short shifter, bits n pieces , its pretty much bits out of all three kits, pretty much the first person to come in will be able to make a full kit! out of the bits n pieces = so make an offer an be quick!

wheel spacers, 8mm x2, 3mm x 2 = $10 & $5

oil filter relocation PART-KIT, includes 3x braided lines, 2x sandwich plates, MISSING 1 dash fitting as i didn't receive it when i bough it lol, can get a new one made @ PWR 4 cheap as, all for=$140

Oil catch can, generic, chrome, has all the bits, never used = $20

rotor covers x2, gloss black, makes it look like a 2piece rotor, looks nice = $10

fmic, ROLLIN IMPORTS made, jap spec lol, bar & plate, perfect condition, has HKS sprayed on one side = $100

cheers jez

mobile: 0401 401 949

ALL PICS ARE DOWN HERE:

----> PICTURES OF THE STUFF HERE LOL! < ---

Edited by 32JEZ

not posting any shit out, cant be f**ked lol.. also.. wen we can arrange pick up or anything.. ill just make it at the BP / maccas in UPPER COOMERA ;)) (Y)

come on guys lol.. buy the wheels.. there $680 worth of just tyres there alone!! .. i still have the receipt!..it was only a few weeks ago i bought them from f1! these bad boys still have the little knobs on them and the writing on the tread lol.. brand new only did like 100k's!!!! ;) all balanced ect.. and the rims are in MINT condition, im only selling as i bought brand new 18's ftw!!! :D had stockies for 3 1/2 years :) *** also for anyone that didn't know takes about 1000k's to wear in a Tyre to get maximum p eek performance!

Edited by 32JEZ

there is only bits n pieces left man, still have the short shifter its self, but u need a few other little things.. u can have the bag for $5 or pick out anything thing u need... im at upper coomera

shiftkit.jpg

the red has been sold.. green is wat is left..so there is pretty much a full kit left.. u need 2 little plastic things..

here is another pic to explain lololol.. paint ftw!!!

DSC00115-1.jpg

you can prolly take off that middle ring off the stock shifter an put it on the aftermarket one too.. >_>

Edited by 32JEZ
  • 4 weeks later...


  • Similar Content

  • Latest Posts

    • Ha ha ha! I know those feels mate I've finally got the garage cleared enough that next weekend I'll do some actual work on my car (hopefully). Unfortunately garage isn't usable after 10am at the moment That said, I've done a lot of work this weekend on helping finalise a friend's Production Race car. Full started Christmas Eve. We're down to about 8 tasks on the list, including "get a wheel alignment". Sometimes it's just easier working on someone else's car or project than our own stuff 😛
    • Ha ha, ended up going it alone.  I just sent it (in a very nervous fashion).  Once I'd released the locks and it didn't automatically start spinning out of control i felt a bit more confident.   It made some loud sounds (cracking and creaking noises) when I first spun it which got the heart rate going again!  I couldn't bring myself to leave it tipped on the side.  I feel a bit more comfortable having back right side up while it sits there. I'd get angry with your last point but you're 100% correct! 😅 Even yesterday I managed to distract myself at numerous times to make a bracket to fit an LED flood light off the back of the house and fix my sons pushbike.  There were other little taks nibbling at my brain for the rest of the day too...
    • Probably one of the more nerve wracking experiences of my entire life! 😂😂 The balance (centre of gravity) is out still but in a direction that gives me comfort!   It's quite bottom heavy still meaning it takes a bit of muscle to rotate it.  The plus side of that is that it wants to to go back to upright.  Better that than wanting to go all stranded turtle on me!
    • hmmm that's not ideal. This is a pretty new engine right, will be interesting if your engine guy has any theories about causes
    • A universal ball joint removal c press kit is better money spent and will work for the Hicas ball joints.  Here's a 45$ CAD Example. ATPEAM Heavy Duty Ball Joint Press Kit with 4WD Adapters | Professional 4 in 1 Ball Joint Press Removal and Installation Tool for Cars and Trucks | Universal Ball Joint Tool with Storage Case, Ball Joint & Tie Rod Tools - Amazon Canada
×
×
  • Create New...