Jump to content
SAU Community

Recommended Posts

I have been told by my fabricator / tuner that in all likely hood, a twin 2860 -5 will probably surge ...

Application is bolt straight up to standard engine and standard manifold, aftermarket exhaust, injectors and all the small supporting mods ... 20psi ~ 340ish awkw.

Reasoning - both turbos will be pushing large amounts of air ... in doing so, they will fight against each other and surge / cause the boooof boooof boooof air pressure noise .... and the turbos will shiet themselves eventually...

Basically, any twin setup size that is 2860 -5 size onwards, will have this problem on a standard manifold/application...

Does any1 have any experience with this?

Does it sound right at all?

Edited by Phantom Snail
Link to comment
https://www.sau.com.au/forums/topic/260012-rb26dett-2860-5-surge-myth/
Share on other sites

  • 2 weeks later...

mythbusters ahoy!

there are two known occurances of surge that we usually refer two in the GTR twin turbo setup

1) compressor surging known and heard as "flutter" when coming on boost

this is a result of the pressure in the manifold going past the compressors effiency, ie the compress map says in the best scenario it can flowing at best 16psi of compression, but for some reason the manifold pressure is say 18psi so the compressors surge resulting in vl turbo style flutter on boost, ie: the compressors are out of effeiency and surging / erractic operation / wobble

any form of compressor surge is bad, can be fatal, and should be avoided/corrected at any cost

2) compressor chuffing / the turbochargers chuff when coming on boost / aka shuffling

this is usually caused by aftermarket pods and piping kits to the stock turbo's. basically the air reverbates and chops past the airflow meter, so it runs like a bitch.

this is common with say 2530s and custom piping and pods. not very common on stockers i dont think, but certainly possible

the std accordian style pipework reduces this by altering the path of airflow, when you replace with shiny smooth pipework, the problem occurs

if #1

compress surging, try lowering the boost, see if that helps

the compressors shouldnt surge under normal conditions

could indicate compressor failure, out of balanace or chopped wheels

again assuming the same problem occurs on say stock boost

if #2

try seperating the pods or putting a shitload of pipework between one of them or both them,

try like some good sized pool shop vacuum hose for one of both of the pods, try bending the pods intake pipes.

anything to alter the intake path of air to the compressor inlet snout

GTSS, HKS hard pipe kit, PFC djetro, 18PSI, 331RWKW, no shuffle at all

interesting, seeing that he's asking specifically about a different turbo... :D

2860-5, 340kw, no shuffle. Std airbox, greddy hard pipe kit, std BOVs.

when i bought my GTR, one of the things that sold me on my car was hearing the sweet sound of the turbos spooling, as ive said before im not a big fan of all the BOV, wastegate loud exhaust's noises etc, so when i got my car back was kinda gutted.

big turbo shuffle, BOV noises (even though its plumbed back) etc.

would some how building a box around the pods mask the noise, not that is any room!

just wanna here the -5s aye

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Of course you can. That was a waste. Straight down one oil drain gallery and out the sump hole. Could at least have run the engine a little (obviously with at least minimum oil level on the stick).
    • Oh really? Maybe I'm being silly. I'll get some more shots. I had it higher but found that it went too high after a drive, I never knew this but exhausts can move around a bit when hot (makes sense, just never knew) and when it was higher it would make nice cooking plastic smells. That said, I could put some heat tape on a'la 90's R33 exhausts     Ha, I've spent a lot of my life in castle hill waiting for cars to be done. I think I'd prefer something closer but thanks D. 
    • @Duncan Yes, changed filter every time. I don't have the service manual for the car yet (Car was imported and they removed everything when importing). I've been using the oil change threads in the forum as reference.   @Milkmun The second oil change was after ~4 months after the first months and I wasn't sure about reusing engine oil that was opened. The third oil change happened within 3 weeks of the second oil change and I used the previous leftover oil to just "clean up" the system. (Poured it through while the sump plug was open")
    • I left the ceramic coating off this bit, hopefully it just comes off after a few drives.   The gap between the spokes is too tight for anything on a stick, its only marginally bigger than my finger. I have to use a brush to get in there and its a big reason why I thought I'd try the coating.   Absolutely will do. I have EBC Blue Stuff pads to put on the front which will make them a bit dirtier. I'm hoping a pressure wash will just get most off. The shine is different to most, its very thin but seems very well 'attached' so hopefully it lasts.   
×
×
  • Create New...