Jump to content
SAU Community

Recommended Posts

If you were in Brisbane I can bench test them for you.

I don't know anyone in Melbourne with the same equipment. There are resistance checks you can do as above was suggested but even they can be misleading at times.

r33 s2, car is missfiring above 4000 revs i regaped my plugs to 0.8 and it fixed the problem for about an hour and now its back to missfiring, i taped the stock coils up wit electrical tape aswel. so since spark plugs only worked as a temproary fix im assuming changing my coil packs will fix the problem what do you guys think?

r33 s2, car is missfiring above 4000 revs i regaped my plugs to 0.8 and it fixed the problem for about an hour and now its back to missfiring, i taped the stock coils up wit electrical tape aswel. so since spark plugs only worked as a temproary fix im assuming changing my coil packs will fix the problem what do you guys think?

It's a possibility man.

Mine was doing something similar to this and when I changed to Splitfires, the problem was solved. Mine was breaking up above 4000rpm on 7lb, and at 3500rpm on 22lb of boost, and she was spewing a shitload of black smoke.

Whether your issue is the same or not can only be discovered through a process of elimination.

I have seen many questions asked regarding this through the forums and there have been several different courses of action taken. Some have had ECU, TPS, spark plug etc issues.

Do a search and you will find what the other guys were discovering, and that will help you to get to the root of your problem.

when your std coils are dead they work fine and then one day they just start to misfire city when the engine is on load/boost

replacing plugs etc doesnt fix the issue as the coils are breaking down. mine died at 160,000kms and replaced with splitfires no issues after that

if its happened all of a sudden and youve put in new plugs then yeah coils are toast - they die sooner or later

when your std coils are dead they work fine and then one day they just start to misfire city when the engine is on load/boost

replacing plugs etc doesnt fix the issue as the coils are breaking down. mine died at 160,000kms and replaced with splitfires no issues after that

if its happened all of a sudden and youve put in new plugs then yeah coils are toast - they die sooner or later

ahh k i see, well i got some more information ive noticed now its missfiring only when its cold like early in the morning when the weather is warmer its fine, is this also sign of coils? just wanting make sure before i got and spend 600

ahh k i see, well i got some more information ive noticed now its missfiring only when its cold like early in the morning when the weather is warmer its fine, is this also sign of coils? just wanting make sure before i got and spend 600

I got a set of these a couple of weeks ago and they are great. http://www.skylinesaustralia.com/forums/Co...80&start=80

Only cost me $350 with post and they are about to release the series 2 versions also.

im pretty sure as well that higher up the rpm the voltage to the coils drop which will make the car miss. you have to run a relay to the coils which will give it constant power. well thats wat im going to try with my ceffy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate šŸ˜Ž
    • Cool, Iā€™m just down Sydney today. Not much time to get online.
Ɨ
Ɨ
  • Create New...