Jump to content
SAU Community

Recommended Posts

1. Fixed racng seat with R33 seat rail

no damage and dirty, same as new

good for drift, $100

2. BOV for R33, can adjust, $20

3. HKS turbo timer without R33 hardness, $20

4. 2 steering wheels, one for street use and one for drift use, $40

5. Trust injection rail, stock injector size 10.5, 100%new with box, $100

6. Brake Rotor, $30, it has machined, 3 times machined left, $30

7. Roger Speaker, $120 very top sound

I live in Eight Miles Plains QLD4113

post-47091-1236499575_thumb.jpg

post-47091-1236499595_thumb.jpg

post-47091-1236499630_thumb.jpg

post-47091-1236499658_thumb.jpg

post-47091-1236499695_thumb.jpg

post-47091-1236499797_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260169-r33-parts-and-others/
Share on other sites

Are the steering wheels $40 totals or each?

Can you please post up a better picture of the steering wheels so I can see the screw setup? Need to know if it'll fit my boss kit.

1. Fixed racng seat with R33 seat rail

no damage and dirty, same as new

good for drift, $100

2. BOV for R33, can adjust, $20 (Hold)

3. HKS turbo timer without R33 hardness, $20 (Hold)

4. 2 steering wheels, one for street use and one for drift use, $40 (Hold)

5. Trust injection rail, stock injector size 10.5, 100%new with box, $100

6. Brake Rotor, $30, it has machined, 3 times machined left, $20

7. Roger Speaker, $120 very top sound

I live in Eight Miles Plains QLD4113

Edited by CTM508

cheers mate for putting them on hold for me i will see you on saturday to come and pick them up

2. BOV for R33, can adjust, $20 (Hold)

3. HKS turbo timer without R33 hardness, $20 (Hold)

4. 2 steering wheels, one for street use and one for drift use, $40 (Hold)

1. Fixed racng seat with R33 seat rail

no damage and dirty, same as new

good for drift, $100

5. Trust injection rail, stock injector size 10.5, 100%new with box, $100

6. Brake Rotor, $30, it has machined, 3 times machined left, $30

7. Roger Speaker, $120 very top sound, Drop to $100

  • 3 weeks later...

Fixed racng seat with R33 seat rail, no damage and dirty, same as new, good for drift, $100

Trust injection rail, stock injector size 10.5, 100%new with box, $100

Brake Rotor, $30, it has machined, 3 times machined left, $30

Roger Speaker, $120 very top sound, Drop to $100

R33 2Dr 400R side skirt 100%new $100

PowerSplirit Power Stable Equipment $30

Unversal A-Pillar Pod 60mm $20

You can make an offer~ Thank

post-47091-1238500494_thumb.jpg

post-47091-1238500547_thumb.jpg

post-47091-1238500576_thumb.jpg

post-47091-1238500642_thumb.jpg

post-47091-1238500667_thumb.jpg

Edited by CTM508

Fixed racng seat with R33 seat rail, no damage and dirty, same as new, good for drift, $100 Drop to $80

Trust injection rail, stock injector size 10.5, 100%new with box, $100 Drop to $80

Brake Rotor, $30, it has machined, 3 times machined left, $30

Roger Speaker, $120 very top sound, Drop to $100

R33 2Dr 400R side skirt 100%new $100 Drop to $90

PowerSplirit Power Stable Equipment $30 Drop to $20

Unversal A-Pillar Pod 60mm $20

Fixed racng seat with R33 seat rail, no damage and dirty, same as new, good for drift, $100 Drop to $80

Trust injection rail, stock injector size 10.5, 100%new with box, $100 Drop to $80

Brake Rotor, $30, it has machined, 3 times machined left, $30

Roger Speaker, $120 very top sound, Drop to $100

R33 2Dr 400R side skirt 100%new $100 Drop to $90

PowerSplirit Power Stable Equipment $30 Drop to $20

Unversal A-Pillar Pod 60mm $20

Apexi N1 damper for GTST33

it's can be adjustable only and rear ring may difficult to adjust

no oil leak and good condition $300 Drop to $280

OEM ignition coil packs with HKS plugs(used) $100 Drop to $80

Great condition for full packs and checked volt already

Trust Greddy BOV with R33/ER34 adaptor

$200~ same as new Drop to $180

you will get what in photo

They are the final price, any question PM me

Thank all



  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...