Jump to content
SAU Community

Recommended Posts

Jim X

I just want to know the stock spec because it kind of give an idea about the potential that car can give. I am a new bie, sorry by the way. wont it be better to buy a car with better factory spec and then mod it. it's a whole different story once it's mod. i know that. that's why i wanted to know who has the guts when it was born.

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by supra

Jim X

I just want to know the stock spec because it kind of give an idea about the potential that car can give. I am a new bie, sorry by the way. wont it be better to buy a car with better factory spec and then mod it. it's a whole different story once it's mod. i know that. that's why i wanted to know who has the guts when it was born.

Well, I can agree with the sentiment I guess. But you have to look at the overall picture, especially if you want to mod the car. For example, mildly modded WRX's and Pulsar GTiR's blow gearboxes all over the place, but the only turbo Skylines that blow boxes are cranking out over 600-700hp. That's GTR or GTS-t. I don't think the Silvia's box is that tough (but I'm not sure).

I would just say that all the cars you mentioned are close enough in performance for it to be not a deciding factor in what you want. Look at other things such as styling, practicality (rear seat and boot space), how much you want to stand out from the crowd (or like me, how much you want to blend in), etc. Also keep in mind the gearbox, because it is often the case that buying a stronger box may cost more than an engine rebuild.

Depending on where you look you will find many different 'stock quater mile times'. They simply vary so much, but from looking at a number of different sites, what I have below seems about right to me.

Generally speaking though, the 300zx is usually low 14's high 13's, with the r33 getting low to mid 14's. The 180 generally gets mid 14's and both the s14 and s15 usually get about mid to high 14's.

‘About the only thing that you could say is "better" about some is that the lighter ones (180SX, Silvia) will get more bang per buck from performance mods, because of lesser weight. The 300ZX being the heaviest obviously gets the least value from its mods, with the Skylines somewhere in the middle’

Yes, this is true but you are not factoring in engine size. Generally speaking a 2.5lt engine will produce more power per mod than a 2.0lt. So even though 300zx, skylines etc. are heavier than s13’s they would produce more power per mod and to an extent that would balance out the weight difference. The lighter car might still have the advantage, but it is more complicated than just weight…

Even if an s13 does respond better to mods than a 300zx, if you go mod for mod, it will take a lot of money for the s13 to catch the 300zx. So yeah, it may have better potential if you want to spend a lot of money, but most people do not modify their cars to those extremes. If you just go with the normal basic bolt ons the 300zx will remain faster.

Also, of course a 200sx is going to be more reliable than a r32. Think about it… a basically brand new car vs a car that will be reaching its 15th birthday soon. No matter how well the gtr was made, 10-15 years of thrashing will have a very large effect on a car.

std auto 300zx would be my bet! they also the fastest for the least amount of money spent. Mates z dropped like 1/2 a second over the 1/4 just from hks pod filter, I think it may have made a little more boost with the filter as well? cat back exhaust, filter & 14psi it ran 12.8@104mph @ willowbank which is a damn site faster than any similar modded line or 200.

The overheating problems that everybody talks about with the 300zx's is only because of people that don't maintain there car, the Z isn't any worse than any other unmaintained car out there.

People remember imports are not new cars generally & the japanese don't always maintain them like they should. I know of 3 TT 300zx's around my area that haven't had any overheating problems because they get the correct servicing!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...