Jump to content
SAU Community

Recommended Posts

Hey Guys,

Cheap tickets to Superlap $15 now or you have to pay $20 on the day, here's the deal;

-Prepay your ticket by paying $15 into the SAUNSW account

-Payments must be done by the 25th March (no exceptions, we need to ensure money has cleared for each group of tickets)

-Use your SAU forum name as the transfer ID (example below)

-YOU CAN PREPAY AS MANY TICKETS AS YOU LIKE!!!

-Tickets will be available for collection outside the gate on the day from SAUNSW execs between;

8am-830am

930am-945am

1030am-1045am

-SAUNSW execs are easy to spot so dont worry about finding one of us

SAUNSW Bank details:

Bank: NAB

Acct Name: Skylines Australia NSW

BSB: 082-356

Account Number: 54-639-3766

Transfer ID: (example) "N1GTR 4 TICKETS"

Ideally we would like to sell at least 100 tickets, so spread the word we have cheap tickets and save some money!

Easy as that!

--------------------------------------------------------------------------------------------------------------------------------------------

The above offer is for EVERYONE, but the below offer is for SAUNSW, SAUVIC and SAUQLD members;

SAUNSW has also organised a members only corporate box to watch Superlap from above the pits (same as last year), to get entry its VERY easy, just show current financial SAUNSW ID and you're in.

We are extending this offer to the interstate clubs, SAUVIC and SAUQLD - bring your ID's.

The corporate box offer is for club members only, non members will be asked to leave so if you're easily offended dont bother trying :(

Link to comment
https://www.sau.com.au/forums/topic/260527-cheap-tickets-to-superlap/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Will deposit $45 tomorrow for 3 tickets.

Super lap will be the bomb, I went to the website and there are lots of tough-arse cars going to be there, Its going to look good but sound so much better.

CARNT WAIT-CARNT WAIT-CARNT WAIT.

whats this "financial SAUNSW ID" thing? im a member on here but never had to pay anything?

and if im a member but my misses aint, then she cant come to the corporate box?

Please help.

Many thanks

Being a "financial SAU-NSW member" means you have paid to join the actual club side of SAU, which is separate from just being a forum-only member.

If you want more details, have a look HERE, and membership form is at the bottom of that thread.

Those that have joined the club have this logo appearing under their user-names: 21.gif

I'll try to make it out for a sticky beak :P Hopefully get some motivation to finish off my car :laugh:

I probably have to pay my renewal fee for club membership... Someone bring a form for me to fill out :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I chose a bad time to buy, at the time there was no gtst's for sale in NSW and my options were qld, vic, or sa and not the greatest examples or too far out of my budget. Ended up picking this one from adelaide sight unseen and got a bit stitched up as you could expect but i dont fully regret it, its just a shame people cant be more transparent in this day and age.
    • IMO just buy a whole R33 transmission and swap the whole thing. Use a palm nailer/air hammer with a roll pin punch to drive the shifter rod end roll pins out. The rod end is discontinued so don't break it. Use gasket dressing on the OEM paper gasket instead of RTV. I personally would not pry on the shifter cover tabs, I broke one trying that instead of just smacking the side with a dead blow rubber mallet to shock it loose from the RTV the last mechanic applied. If you can't get the flanges totally clean and free of any residual RTV and/or you might have a gap that is bigger than it should due to flange damage use RTV on that surface instead of the OEM specced anaerobic sealer. Anaerobic sealer is most likely the right sealant for the job, it's just too easy to mess it up with too large a gap or bad surface prep/roughness seemingly. If you do rebuild what you have it's for a whole gearset that can take high torque. Don't bother with OEM at that point.
    • Little hose. Big hose. They're all waiting to kill the engine.
    • Nice ride, hard to find these days!
    • Full e85 barrell stuff real world for reference if it helps as Ive pushed 2 x sets injectors to limit Above mentioned Bosch 1480cc run on 4 bar base to the apparent 1650cc on rb2.7 yielded 912hp / 684  kw  at 92% duty on hub dyno ID1700's - RB 2.8 ...1015hp / 760 kw at 87% duty - hubber dyno + shown off data on track my opinion IF you change injectors just go bigger than you think you need the modern/ good larger ones run just fine if tuned properly even if way bigger than required even on streeters  
×
×
  • Create New...