Jump to content
SAU Community

Recommended Posts

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Can someone let me know if there is a price diff between ISO and IS Copper....

Is that to say, if you drive to the snow, once, your car will die?

I occasionally visit skiing resorts....

The ISO kit comes with a valve that you open when the temperature is really cold (but subsequently reduces the benefit of the ISO spacer). It certainly won't kill you car. The main difference is the copper kit doesn't need this valve.

Unless you live in the snow I wouldn't worry about it.

The Motordyne has consistently better reviews, especially the ISO version.

I read that although skunk2 may be easier to install but skunk2 spacer is 5/8" instead of MD which is available in 5/16" or 1/2".

since the skunk2 is higher than 1/2" with the engine cover on it actually rubs the bonnet a little bit... fine if you want to leave the engine cover off but you may get signs of scrubbings on your plastic engine cover.

So to make sure i understand correctly rs73, after the install of the plenum, skun2 or MD, you will be able to place the cover on, but it will scrub?

Or is only an issue with the Skunk2?

I'd like to keep the cover.... but if the trade off is HP, happy to rid it.

The reason I'm going with the ISO Copper version is that it does all the things that the ISO thermal version does but does not need the CCV. Instead it has a copper plating to install on the throttle body. The CCV requires you to cut one of your engine lines to install and if you are going into snowy conditions you need to open the value to let hot air into the throttle body so it doesn't freeze. The copper version with is install and forget. Also means it can be fully removed without leaving any trace behind.

EDIT:

How important is it to install the ccv. i live in an area where it doesn't get that cold. should i install it and leave it closed?

Copper Iso Thermal is a premium set and forget component that can be used in place of the Coolant Control Valve (CCV). It doesn't matter how hot or cold the weather is, you don't have to adjust a valve based on the season or ambient temperatures. Install it and the throttle body remains heated while the plenum continues to remain thermally isolated. Keeping the throttle body heated prevents ice formation on the throttle body butterfly valve when driving in cold weather. If it snows or gets really cold in your area, use the Copper Iso Thermal so your engine can take full advantage of the cold air you are driving in.

Its not necessary to install the CCV but it is better if you do. Iso Thermal does not make HP but it does prevent the loss of it. Its good for about 1-2 HP by preventing excessive plenum heat soak as your engine becomes hot. And yes, you will generally leave the CCV closed. Iso Thermal or Copper Iso Thermal is beneficial no matter how hot or cold it gets in your area.

Edited by Aust350z

Updated List - please contact me if you haven't already.

Melbourne Group Buy @ $375ish - Pick up from maxw3l

1. me - ISO [confirmed]

2. dannyw (SAU) - ISO [confirmed]

3. db350z (350Z - pw350gt on SAU) - ISO [awaiting details]

4. Vai350Z (350Z) - Basic [awaiting details]

5. Aust350Z (350Z) - ISO Copper [confirmed]

6. SkEdY (350Z) - Basic [confirmed]

7. 3fifty (350Z) - ISO Copper [awaiting details]

8. NoImagination (SAU) - ISO [awaiting details]

9. ZTRACK (350Z) - Basic [awaiting details]

Sydney Group Buy @ $375ish - pickup from ???

1. BEE (350Z) - Basic [confirmed]

2. dkc64 (350Z) - ISO Copper [awaiting details]

3. g33k (SAU) - ISO Copper [awaiting details]

4. ??

5. ??

I really want one of these but I cannot see anywhere, other than the manufacturers website, a before and after dyno run. If anyone can show me a 10-12 horse power gain, I'd be in

Cheers

Geoff

lolz.. the group buy is going to end VERY soon, payment are being gathered and order will be put soon, i think..

IF THERE IS really a 10horse power gain, i m guessing some ecu mod on it..

as usual, any mod to reach its full potential, ecu has to be mod/tuned..

anyone can correct me if i m wrong, coz i just started learning all these stuff as well..

I've read a few threads which say otherwise, but cbf digging them up. By most accounts, this is acknowledged as one of the best n/a mods for a 350z/v35.

Anyway we've got enough takers, so up to you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...