Turbo Recommendation

[R31Nismoid]

I told you in the post above...

AFM i think is even less... either way stock stuff, you aint seeing 500rwhp in your wildest dreams.

[nismonyo]

R31 Nismoid

I get you point loud and clear......

Now since a stock system can give approx 350rwhp or less.. is this with the stock T25 turbo or with an upgraded turbo?

[joeyjoejoejuniorshabadoo]

stock turbo will net you max 200rwkw

stock injectors 230-240 without ramping up the pressure to stupid levels, stock afm around the same

[nismonyo]

what is RWKW

[joeyjoejoejuniorshabadoo]

RearWheelKilloWatts

[R31Nismoid]

R31 Nismoid

I get you point loud and clear......

Now since a stock system can give approx 350rwhp or less.. is this with the stock T25 turbo or with an upgraded turbo?

Stock turbo will make260-270rwhp at the limit, and do not run more than 10-11psi

You need a mild turbo upgrade (HKS2530) to get 330-350rwhp.

to convert rwhp into rwkw - times by .745 (roughly good enough)

So 350rwhp X 0.745 = 260rwkw

[Pattygtst]

I seen a few stock injectors max out at 300rwhp.

[darrinspencer]

to convert rwhp into rwkw - divide by .745 (roughly good enough)

So 350rwhp / 0.745 = 260rwkw

Hate to be picky, but it is actually multiply by 0.745

So 350rwhp x 0.745 = 260rwkw.

(Feel free to edit your post and delete mine)

[R31Nismoid]

oh shit... indeed

i hit the button so mindlessly on my calculator

edited!

[wolverine]

oh shit... indeed

i hit the button so mindlessly on my calculator

edited!

unless you are secretely living WA??

(puts on flame suit just in case someone takes this too seriously)

[nismonyo]

What do they mean by>>60 AR on the comp and 48 on the turbine?

does it means that it spools fast?

because i am getting a turbonetics T3 60 comp and 48 turbine? could you say if this is a good turbo or not.

[geraus]

get a hypergear highflow =) save you a cash. im on 17psi doin 230-240kws =) stock internals , all thanks to Trent from Status tunning

Edited March 19, 2009 by geraus

[R31Nismoid]

What do they mean by>>60 AR on the comp and 48 on the turbine?

does it means that it spools fast?

because i am getting a turbonetics T3 60 comp and 48 turbine? could you say if this is a good turbo or not.

comp housing size, doesnt tell a lot.

a .48 turbine however tells a little more... and a .48 is pretty small, so it wont make much power, very restrictive.

The wheels tell the true story, but honestly it sounds like your looking at ebay - stop doing that.

Get a genuine Garrett. The only way.

[RB26SX]

T61 with .63 exhaust housing. 260kw, 427nm @ 0.9 bar, boost from 3500 rpm. Fit on std manifold with spacer.