Jump to content
SAU Community

Recommended Posts

Well your all thinking - he crashed his car......

haha sorry to disappoint but I'm an idiot in another way,

my car has a C.A.I in the bottom left of my front mount and tonight I was at a wedding reception when it started absolutely pissing down rain....most of you would have already guessed what happens next.....C.A.I + Rain = f**ked engine

my car was parked on the top of a 4 story car park and I didn't particularly want to leave it up the top in that kind of weather (paranoid since my insurance excess is 3000 due to me lowering my yearly premium) :) anyywayyyy i went out and was going down the ramp from the top level to the undercover level bellow when at the bottom of the ramp there was flooding and I didn’t notice since water was falling from every direction of the sky!! and so the front of my car plowed through about 10000000 L of water :D ...and next thing i know my car is coughing and spluttering and then stalls....took me a few minutes to start it up again but the damage was already done...the car idles....but has savage knocking, indicating most probably 1 or 2 bent valves.....:(

Anyway thought I would share my night with you all!!

Chuck any ideas on what else might have happened...anyone have any similar experiences?....:P...I’m taking a wild guess of around 1000 buks to fix??

Anyway give us your thoughts!

Link to comment
https://www.sau.com.au/forums/topic/261110-stuffed-my-car-tonight/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if i was you i'd be checking that your coil packs and spark plugs arent flooded with water. just get to the plugs/coil packs and make sure they are as dry as possible before re-assembling it all. you'll need to remove any water from your piping as well as your wet air filter before starting the car up again. also make sure your AFM isnt fcuked too.

if i was you i'd be checking that your coil packs and spark plugs arent flooded with water. just get to the plugs/coil packs and make sure they are as dry as possible before re-assembling it all. you'll need to remove any water from your piping as well as your wet air filter before starting the car up again. also make sure your AFM isnt fcuked too.

Thanx man, will do!

hey its pretty unlikely that you have hudrolocked (how ever you spell it) your motor unless u drove through a half a meter puddle, the water would have to travel through your filter past the afm, the turbo, then intercooler and finally to your engine, and when you motor get enough water in there it bends your conrods, as it been said before in this thread check your electrics and intake piping, a having a couple cylinders missing firing sounds like a very bad knocking.

is it possible that water got into one of my cylinders and isn't allowing the spark plug to fire?? hence why ther is knocking noise??? and if i do have a bent con rod or valve or wtvr would i still be able to start the engine??

bent rod = really bad knocking, you'll hear a really bad rattle coming from the engine. and it will be REALLY rough on idle as well as loads of blue smoke coming out of your exhaust - thats if it actually idles. if you're getting black smoke out of your exhaust then chances are your spark plugs are flooded. do what i said above if its blowing out black smoke and you should be sweet.

As mentioned before, doubt you've bent a valve from driving through a puddle, especially with a cold engine (not that that would matter).

Dry it out it should be fine.

Btw who told you you have rooted the top end from driving through a puddle?

This whole hyrdo lock thing is getting out of control, the car would stop before you sucked in that amount of water, full stop.

The only way I can see that happening is a massive body of water and the car travelling at such a speed that momentum keeps the rears and crank spinning way after the ignition fails.

I had water get into my AFM once. Engine sounded like it was going to grenade, but after all the water dried everything was fine.

Park the car in a garage for a few days let everything dry out. See what happens.

I had water get into my AFM once. Engine sounded like it was going to grenade, but after all the water dried everything was fine.

Park the car in a garage for a few days let everything dry out. See what happens.

yea but do you know if the water actually got into your engine...like i have water in my cams!! and water in the cylinders!!

anyway

i was up till about 4 this morning taking of my throttle body and intake manifold (to get to a Non-turbo coil pack and spark plug bay is a bitch and a half because the intake goes over the coil pack cover.) anyywayy i took all the coil packs out and spark plugs... (they were black) and turned the engine over a few times...lots of shit spat out as expected...then i put her all back together and started it up but the knock is still there.....

now my question is...when i turned the engine over with all the spark plugs out i didn't hear any tapping or metal on metal noises...does this mean that the pistons arnt hitting any valves?? and that the knocking noise is just one of the cylinders not firing??

damn.. shit situation man :blink:

take it to your workshop and get them to take alook at it rather than potentially doing more damage. once you've sorted the electrics as joe suggested any further noise could be fatal

Well your all thinking - he crashed his car......

haha sorry to disappoint but I'm an idiot in another way,

my car has a C.A.I in the bottom left of my front mount and tonight I was at a wedding reception when it started absolutely pissing down rain....most of you would have already guessed what happens next.....C.A.I + Rain = f**ked engine

my car was parked on the top of a 4 story car park and I didn't particularly want to leave it up the top in that kind of weather (paranoid since my insurance excess is 3000 due to me lowering my yearly premium) :blink: anyywayyyy i went out and was going down the ramp from the top level to the undercover level bellow when at the bottom of the ramp there was flooding and I didn't notice since water was falling from every direction of the sky!! and so the front of my car plowed through about 10000000 L of water :blink: ...and next thing i know my car is coughing and spluttering and then stalls....took me a few minutes to start it up again but the damage was already done...the car idles....but has savage knocking, indicating most probably 1 or 2 bent valves..... :)

Anyway thought I would share my night with you all!!

Chuck any ideas on what else might have happened...anyone have any similar experiences?.... :) ...I'm taking a wild guess of around 1000 buks to fix??

Anyway give us your thoughts!

how many inches of water was there?

how many inches of water was there?

8-10 inches - Im guessing tho, because i remember seeing water washed up over the bonnet, meaning that it easily was higher then the front mounts clearance from the ground and when the car stopped i knew in my head exactly what happened...an i freaked so i didn't really go and check.

8-10 inches - Im guessing tho, because i remember seeing water washed up over the bonnet, meaning that it easily was higher then the front mounts clearance from the ground and when the car stopped i knew in my head exactly what happened...an i freaked so i didn't really go and check.

sorry if this has been covered in recent posts....i just havent read up...

ok

this is what ill do IF....there is water in the engine.....

1.) remove all spark plugs from the head

2.) dont forget to which ingnition lead goes to what plug.,..if in doubt...mark them

3.) if the plugs are fouled, you can either replace them...or if they are good plugs, you can actually heat them on the stove to make it red hot...to get rid of the carbon. (then give it a clean with some steel wool...then it be good as new)

4.) crank the engine to push all water out of the cylinders...id crank it say...10 sec..give it half a minute then crank it 10 sec again.... then repeating it one more time. (this is just a simple measure that your not gonna f**k up your Start motor...cause its not designed for continuous usage like this..it will burn out)

5.) Open your air box, if you have a concealed one... make sure it is dry from water. if it still is waterlogged.....remove all water. im sure if your car pinged and stalled....it got in through her

6.) if it still does it........id change the oil....it may have gotten in there

and will always disrupt the function of the combustion.

Edited by eeiko321

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...