Jump to content
SAU Community

Rips 240z Into The 7s!

Lithium

By Lithium,
in Motorsport Discussion & Builds

 Share

Recommended Posts

R.I.P.S NZ Collaborator

R.I.P.S NZ

Posted
Posted
What the hell is in the r32 at the 4min 18sec mark?

Another RIPS RB30'd car?

Lol, yeah thats Joes GTR, runs mid to low 10s and on that run I gave him a good head start so I could wind the old turbo up for a nice wheelie, lol.

Joes been around in that car for a long time and its bloody quick for a full weight streeter, he's a top bloke too.

I remember after one race we had about a year ago, he came up to me and said in a joking way said he was pissed off and going home casue he'd never been passed by someone who was on the back wheels before, lol, it was real funny at the time.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
Lol, yeah thats Joes GTR, runs mid to low 10s and on that run I gave him a good head start so I could wind the old turbo up for a nice wheelie, lol.

Joes been around in that car for a long time and its bloody quick for a full weight streeter, he's a top bloke too.

I remember after one race we had about a year ago, he came up to me and said in a joking way said he was pissed off and going home casue he'd never been passed by someone who was on the back wheels before, lol, it was real funny at the time.

Is that Joe Kyle Rob?

Nice fella...i gave him a hand with his car at Import All Stars at Taupo a couple of years ago.

Awesome work Robbie...well done mate.

EDIT: i just read Lith's post on the previous page.

Edited by DiRTgarage
N1GTR Grand Master

N1GTR

Posted
Posted
Lol, yeah thats Joes GTR, runs mid to low 10s and on that run I gave him a good head start so I could wind the old turbo up for a nice wheelie, lol.

Joes been around in that car for a long time and its bloody quick for a full weight streeter, he's a top bloke too.

I remember after one race we had about a year ago, he came up to me and said in a joking way said he was pissed off and going home casue he'd never been passed by someone who was on the back wheels before, lol, it was real funny at the time.

Ah fair enough

Nice wheelies, as always!

  • 2 weeks later...
R.I.P.S NZ Collaborator

R.I.P.S NZ

Posted
Posted (edited)
So close to the RB26 record :)

Whats Marks best time and mph now? any idea of the weight and whp of his car?

I'd love to get on a decent Aussie track, Reece is very sure we'd drop 2-3 10ths and gain 5-10mph on your FAR superior strips.

Rob

Edited by R.I.P.S NZ
R.I.P.S NZ Collaborator

R.I.P.S NZ

Posted
Posted
Not 100% sure, dirtgarage will know for sure, but isnt 7.57 still the record?

Ah, I thought you ment Mark, Yeah Reece has run 7.57 in Aussie but I'm not sure if he was still 26 or not.

We have run very close to Reeces quickest NZ time so thats good enough for me in what is basicly a back 1/2 street car.

Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R32 GTST - 600KW+ RB28/CD009 Build

      By GTSBoy · Posted

      Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • niZmO_Man
      Is r33 gtr steering wheel the same as the gtst?

      By niZmO_Man · Posted

      oi (you're right though)
    • pogman
      Low oil pressure after WOT

      By pogman · Posted

      All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
    • Yeetus
      RB25DET Solid lifter conversion

      By Yeetus · Posted

      Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
×
×
  • Create New...