Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

john's

Actually, I would like to point out that I have only ever blamed the guy who installed the alarm in my car (useless prick), and to a very limited degree Phantom Motors/Jack for a few dodgy things on roadworthy and going against what I was told originally. I have no problems with any of the work Tas did on my car or the help he has given me.

Not trying to turn this into a pissing contest, but as my name was mentioned I just wanted to clear that up from my end bro :D

Also... did Adam ever get any work done there apart from a minor service?

Edited by Isola
I have no problems with any of the work Tas did on my car or the help he has given me.

So shouldnt you be rushing back to him to do some more work?? as apposed to hitting up Marto/Dan for help??

I'm leaving this issue before it turns into a shit fight.

also - as for Adam, I just know he too went elsewhere - I havn't kept in touch with him.

disclaimer:

I know I am dealing with John here - so I know that regardless of what I've said, I know I'll get some smart remark/pay out/thats waht she said/excuse/blah blah blah - but I dont really care.

how would 18*7.5 +38 fill my front guards? better or worse than present?

and the rears that im looking at would be 18*9.5 +38. Some staggered as wheels but, meh.

A penny for your thoughts?

F off. Im broke! =P

how would 18*7.5 +38 fill my front guards? better or worse than present?

and the rears that im looking at would be 18*9.5 +38. Some staggered as wheels but, meh.

A penny for your thoughts?

F off. Im broke! =P

dont be a clown - they all bullshit sizes

take tristan's advice;

fronts: 19*9.5 +2, 255/30

rears: 19*10.5 -7, 275/30

proof:

1243310014.jpg

1243309985.jpg

ps get those wheels too - Volk GTCs

Well since my name was mentioned here is my two cents,

I wasn't happy originally with the service Tas did on my car but after talking to him about it and the follow up service I received I was happy. I was also happy with the repair to my accelerator as well. I wasn't happy with the avcr simply because the intermitent noise I was hearing was faulsly reported as a bearing in the turbo due to over boost. It wasn't it is the throw out bearing in the gearbox. I adressed this with Tas. I accepted part responsibility and we moved on. Personally I think that Tas has done his best and my hat is off to him for going out on a limb and trying to start a business.

I ask him for advice about certain things and if he did have a shop I would take my car back there.

The End.

Lets build a bridge and move on.

John : apologies for the other week. Was a bit of a head f_ck on the weekend as my son (who I haven't seen in 7 years) was at my mums. So you'll forgive me if I was a bit out of form and not contactable for a while.

Martin : Presently I do not think I will be there on thursday. I will endeavour to get your parts to you somehow... possibly by swallow.

Does anyone know the airspeed of a un-burdened swallow ?

Tony I have some wheels sitting at my place that are my mates from Melb. Been at my place for a while.......... 12 months to be exact. Pretty sure he's happy for me to sell them. 17 x 8 and 17 x 9 with + 35 offsets. Have tyres too. Feel free to come and try them on.

So shouldnt you be rushing back to him to do some more work?? as apposed to hitting up Marto/Dan for help??

I'm leaving this issue before it turns into a shit fight.

Like I said man, not turning it into a fight or anything. I just wanted to speak up as my name was mentioned. Tas was actually busy dealing with his own cars when I was wanting more work done on my car, and Dan and Martin offered to help me. I'm on the fence for the whole thing and staying objective and have no problem staying friends with both parties who've done no wrong by me.

Phantom Motors however, can eat a dick.

disclaimer:

I know I am dealing with John here - so I know that regardless of what I've said, I know I'll get some smart remark/pay out/thats waht she said/excuse/blah blah blah - but I dont really care.

I actually didn't think my other post sounded all that confrontational :whistling:

Edited by Isola

Those wheel doesnt look like GTC Tristan. GTC has fatter spokes. Anyway you going drifting next Friday? I'll probably come have a look if you are.

John: Hahaha... I havent been there for ages. Just thought of going there and get a couple of shots for the car. Afterall, I dont have a good camera nor is my camera skill any good.

Colin: You running pod filters?

John: Hahaha... I havent been there for ages. Just thought of going there and get a couple of shots for the car. Afterall, I dont have a good camera nor is my camera skill any good.

See if you can coax the GABNR out of hiding. It'd save you getting aids from Harry's.

dont be a clown - they all bullshit sizes

take tristan's advice;

fronts: 19*9.5 +2, 255/30

rears: 19*10.5 -7, 275/30

proof:

1243310014.jpg

1243309985.jpg

ps get those wheels too - Volk GTCs

Can you afford those? I sure as hell know I cant.... how can Tony-I-has-no-job afford such luxuries?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
    • They've had some weird failures on their brake actuators. One of them was because they added some kind of lubricant to the factory fill brake fluid that aftermarket brake fluid didn't have so it would affect the seals. Another was just mysterious, probably internal corrosion or something eating away at Prius brake actuators. Parts alone for those are a few thousand USD so not a cheap fix.
    • Selling a genuine Nissan Skyline R33 Coupe 8-Pin Power Window Master Switch Part No. 25401-26U10 Price $300   IMPUL Gear Knob – Rare JDM Upgrade Upgrade your interior with this genuine IMPUL gear knob – a rare and stylish addition to any JDM build. Premium quality, perfect fit, and an authentic Japanese touch for your ride.  Price:$300 Nissan Skyline R33 (Series 2) Sedan Tail Lights Immaculate Condition OEM JDM S2 a pair of OEM Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state. Price:$900   Located in Melbourne (Western Suburbs) – Shipping available Australia wide at buyer’s expense. DM if you need anymore details.  
×
×
  • Create New...