Jump to content
SAU Community

Recommended Posts

Hey V35_Paul did you install or get installed the plenum spacers? how is it since? I'd like to do it too.

Also I've been trying to get headers for my V35 and I was going to get them through C-Red who did the install to his own V35 before he sold it, but I havn't been able to get in touch with him to get some.

Can anyone recommend where etc I can get a set and who could install them around Perth?

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Got my Spacer but yet to put it on. I'm doing a Dyno test before and after. I'm on the Dyno friday at 3 for the before test.

I also heard that you need to put the spacer on when the car is cold and that the computer "might" need running time to adjust to the spacer so i will do the after test monday.

I'll put it on myself doesn't look to hard.

Found this on Ebay http://cgi.ebay.com.au/Stainless-Steel-Exh...p3286.m20.l1116

don't know anything about it

Lots of Headers in US

Well I did the dyno test. My car is "Stock". Did 3 runs, I got 163kw on 2 runs and 162kw on one.

I couldn't put the Spacer on becasue the car is too hot, I'll put it on tomorrow then do another run on monday.

Here are my results of my best run

post-60315-1238755132_thumb.jpg

post-60315-1238755153_thumb.jpg

post-60315-1238755169_thumb.jpg

More problems with my Body kit. need clips for the side skirt. i'm going to try some plaster board cross screws. (When you screw them the back stars out and pulls tight) They are used to hold A/C up on plaster walls.

if it works i'll have my car back today looking super cool. (it was already cool before but now it's SUPER)

All done. Now i can stress less.

Body kit looks good, still need to put a badge on the grille, badges on the skirts and fog lights.

Tell me what you think, do you like it or should i have got something else?

pics with the phone

post-60315-1239334656_thumb.jpg

post-60315-1239334725_thumb.jpg

  • 1 month later...
Hey WA V35 owners.

Thought i would try and find out how many WA V35's there are.

Post a pic (if you got one) and count off.

(1)

hey im a new member from WA Ipost-63076-1243175761_thumb.jpgv had this ride for about 4 months and i love it its a 2003 v35 GT 6 speed manual hope ya all like

  • 1 year later...

its an old thread but seems to me that some have come and gone... can we do a count of who in wa actually uses this forum

1.xtc - please add along...this will give me an idea or indication to do the next cruise as i want as much members out there as possible, and a good notice.

  • 2 weeks later...

hey guys im ultra new..... just got my V last wednesday, hit the pits on friday and cleaned it up on the weekend

so yeah, i have been keeping an eye on this site for a while

Good to see that there are some V lovers in Perth

Im learning new things about my Beautiful car every day :P

Hope to see you on the streets some time, unfortunatly i work alot and get pretty busy doing ... well not doing much but

im glad that there are others in WA to help me out if ive got issues and..... i doubt it but if need be i may be able to assist you all :P

ill try and stay active

>.>

<.<

but im notoriously bad at using the internets

POST NO#1 COMPLETED! (bows)

now.. how do i send thisssss.......

Its a blue one xtc, not quite as sexy as yours (yet) haha, after polishing it up it seems to have a pearlieishie quality YAY !

doubt ill get to your lvl of mods but i will keep tinkering away at it who knows... thats what they all start saying next thing i know ive got a green car with fluro orange rims and a biplane wing on the back

errr... i think i just vomitted in my mouth. You can be assured i would never do that too my precious V.

oh and thanks for the warm welcome Crisp =D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...